KSB Indonesia Stock Status
Data Updated As of
Aug-31-2012 09:59
Itemgroup (All)
    Data    
prod grp itemname On Hand SO booked PO booked
Aquachem AQUACHEM 150x125-315 (SS304/SS304/SS304/Mech. seal) 2 0 0
  AQUACHEM 50x32-160 (SS304/SS304/SS304/Mech. seal) 4 0 0
  AQUACHEM 50x32-200 (SS304/SS304/SS304/Mech. seal) 1 0 0
  AQUACHEM 65x40-200 (SS304/SS304/SS304/Mech. seal) 1 0 0
  AQUACHEM 65x50-125 (SS304/SS304/SS304/Mech. seal) 2 0 0
  AQUACHEM 80x50-200 (SS304/SS304/SS304/Mech. seal) 4 0 0
Aquachem Total   14 0 0
Aquaflow Aquaflow 100x75-300 (SSCMA/SSCMA/SS304/Mech. Seal)Impeller Dia. 280 mm, P/N. AVFK308S 5 0 0
  Aquaflow 150x100-300 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  Aquaflow 50x32-250 (SSCMA/SSCMA/SS304/Mech. seal) 3 0 0
  Aquaflow 50x40-330 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  Aquaflow 80x50-250 (SSCMA/SSCMA/SS304/Mech. seal) 20 0 0
  Impeller Aquaflow 50-280 5 0 0
Aquaflow Total   41 0 0
Aquavane Aquaflow 80x50-280 (SS304/SS304/SS304/Mech. seal) 6 0 0
  AQUAVANE 100-160/A 4 0 0
  AQUAVANE 100-200/B 2 0 0
  AQUAVANE 100-260/A 9 0 0
  AQUAVANE 100-260/B 3 0 0
  AQUAVANE 125-200/A 1 0 0
  AQUAVANE 125-200/B 2 0 0
  AQUAVANE 125-320/A 2 0 0
  AQUAVANE 150-200/A 1 0 0
  AQUAVANE 150-200/B 1 0 0
  AQUAVANE 200-400/A 6 0 0
  AQUAVANE 200-400/D 1 0 0
  AQUAVANE 32-130/B 9 0 0
  AQUAVANE 32-260/A 11 0 0
  AQUAVANE 40-130/B 2 0 0
  AQUAVANE 40-160/A 7 0 0
  AQUAVANE 40-160/B 2 0 0
  AQUAVANE 40-260/A 1 0 0
  AQUAVANE 40-260/B 3 0 0
  AQUAVANE 50-200/B 4 0 0
  AQUAVANE 50-260/B 2 0 0
  AQUAVANE 80-160/A 1 0 0
  AQUAVANE 80-200/B 3 0 0
  AQUAVANE 80-260/A 1 0 0
  AQUAVANE 80-400/A 1 0 0
  AQUAVANE 80-400/B 1 0 0
  IMPELLER FOR AQUAVANE 40-160/B 1 0 0
  IMPELLER FOR AQUAVANE 50-260/B 1 0 0
  IMPELLER FOR AQUAVANE 65-200/B 1 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 25 EagleBurgmann 23 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 45 EagleBurgmann 1 0 0
  AQUAVANE 32-260/B 5 0 0
  AQUAVANE 65-320/ B 2 0 0
  AQUAVANE 32-200/A, Trimmed 2 0 0
  ELITE E100-40, (A20C) 1 0 0
  AQUAVANE 65-320/A 4 0 0
  IMPELLER FOR AQUAVANE 50-160/A 4 0 0
  IMPELLER FOR AQUAVANE 65-200/A 2 0 0
  Part Kit; Rathi Coupling SW276 2 0 0
  Aquavane 50-320/A+SS420+MS 1 0 0
  IMPELLER FOR AQUAVANE 32-200/A 3 0 0
  AQUAVANE 50-160/B 1 0 0
  AQUAVANE 250-320/A 2 0 0
  AQUAVANE 32-160/A 11 0 0
  AQUAVANE 100-400/B 3 0 0
  AQUAVANE 65-200/B 3 0 0
  AQUAVANE 65-260/A 2 0 0
  AQUAVANE 80-160/B 4 0 0
  AQUAVANE 150-260/A 2 0 0
  AQUAVANE 40-130/A 12 0 0
  AQUAVANE 200-400/B 1 0 0
  AQUAVANE 125-400/A 1 0 0
Aquavane Total   181 0 0
BOA-H BOA-H Cast Iron JL 1040 DN 200mm 25 0 0
  BOA-H Cast Iron JL 1040 DN 250mm 12 0 0
  BOA-H Cast Iron JL 1040 DN80mm 5 0 0
  BOA-H Nodular Cast Iron JS 1025; PN16; DN80 mm 16 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN100mm 8 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN25mm 5 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN40mm 21 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN50mm 41 0 0
  BOA-H Cast Iron JL 1040 DN 300mm 1 0 0
  Check Valve BOA-RVK; PN 16; DN 32; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 2 0 0
  Check Valve BOA-RVK; PN 16; DN 50; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 12 0 0
  Check Valve BOA-RVK; PN 16; DN 25; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 14 0 0
  Check Valve BOA-RVK; PN 16; DN 40; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 19 0 0
BOA-H Total   181 0 0
CK-Pump Spare Parts Mechanical Seal SZH/ 1 7/8 Carbide 5 0 0
  Mechanical Seal SZH/1 5/8 Carbide 5 0 0
  Mechanical Seal SZH/1375/Rb-Rb VSIC 5 0 0
CK-Pump Spare Parts Total   15 0 0
CK-Pumps Aquaflow 100x75-300 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 3 0 0
  Aquaflow 100x75-420 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 3 0 0
  Aquaflow 150x100-300 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 2 0 0
  Aquaflow 80x50-280 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 18 0 0
CK-Pumps Total   26 0 0
Consumable Items V-Belt SPA-2360 32 0 0
  V-Belt SPB 1900 3 0 0
  V-Belt SPB 2120 3 0 0
  Vacuum Tank LCC 100 Stainless Steel Material c/w Flange ANSI #150, 6" 1 0 0
  Rubber Spider, Sapre part Flexible coupling for RDL 600-710 A 19 0 0
  Level Sensor Liquiphant FTL20-302D 34 0 0
Consumable Items Total   92 0 0
Coupling Coupling - Flender H - 140 / 140 29 0 0
  Magnetic Clutch Borelli 12 VDC dia.pulley 12" 5 0 0
  COUPLING - Flender - B58 25 0 0
  Rubber - Martin - F180F 4 0 0
Coupling Total   63 0 0
DIAPHRAGM VALVES Sisto RSK-S PN.16 DN.100 NRH/NRH, IIR disc; JIS 10K Flange 2 0 0
  Sisto RSK-S PN.16 DN.200 NRH/NRH, IIR disc; JIS 10K Flange 1 0 0
  SISTO 16 DN200 Body Cast iron with NR-H lining; Diaphragm EPDM 1 0 0
  SISTO 16 DN125 Body Cast iron with NR-H lining; Diaphragm EPDM 2 0 0
DIAPHRAGM VALVES Total   6 0 0
Diesel Engines V-Belt SPA 1500 8 0 0
Diesel Engines Total   8 0 0
DIN BAL&CONTR VALVES Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 250; Conn All Connection; c/w MR25 Gearbox 26 0 0
DIN BAL&CONTR VALVES Total   26 0 0
DIN GLOBE VALVES ECOLINE SC 150 ND 150 mm; RF; Body : A216 WCB; Trim 8 (13%Cr/stellite) 8 0 0
  NORI 160 RXS DN50mm 16Mo3 body material 5 0 0
  NORI 160 ZXS ND 15mm, Butt weld end conn., Body Mat'l 16Mo3 1 0 0
  NORI 160 ZXS DN25 mm; SW; Body : 13 CrMo 4-5 DN25mm 1 0 0
  Eco-BLT 150 ND25 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 22 0 0
  NORI 320 ZXSV DN20 mm; SW; Body : 10 CrMo 9-10 (1.7380) 4 0 0
  NORI 160 ZXS DN32mm; Body 13 CrMo 4-5 (1.7335) 8 0 0
  NORI 160 ZXS DN15 mm; BW; Body : 13 CrMo 4-5 10 0 0
  NORI 500 ZXSV DN65 mm 4 0 0
  NORI 500 ZXSV DN50 mm 6 0 0
  NORI 320 ZXSV DN25 mm; SW; Body : 10 CrMo 9-10 (1.7380) 1 0 0
  NORI 160 ZXS DN25 mm; BW; Body : 13 CrMo 4-5 DN25mm 6 0 0
DIN GLOBE VALVES Total   76 0 0
Ecoline Eco-BLT 150 ND15 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 56 0 0
  Eco-BLT 150 ND25 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 70 0 0
  Eco-BLT 150 ND25 mm; RF; Body : A216 WCB; trim 304 10 0 0
  Eco-BLT 150 ND32 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 25 0 0
  Eco-BLT 150 ND40 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 83 0 0
  Eco-BLT 150 ND40 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 22 0 0
  Eco-BLT 150 ND80 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 32 0 0
  ECOLINE FY 150 ND 150 mm; RF; Body : ASTM A216 WCB; with SS304 screen 1 0 0
  ECOLINE FY 150 ND 250 mm; RF; Body : ASTM A216 WCB; with SS304 screen 3 0 0
  ECOLINE FY 150 ND 300 mm; RF; Body : ASTM A216 WCB; with SS304 screen 2 0 0
  ECOLINE GL 150 ND 200 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 150 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 5 0 0
  ECOLINE GL 150 ND250 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GL 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 30 0 0
  ECOLINE GL 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GL 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GT 150 ND 100 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite); Size : ND100 mm 35 0 0
  ECOLINE GT 150 ND 65 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 9 0 0
  ECOLINE GT 150 ND 80 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 6 0 0
  ECOLINE GT 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 27 0 0
  ECOLINE GT 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GT 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 20 0 0
  ECOLINE GT 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 45 0 0
  ECOLINE GT 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 22 0 0
  ECOLINE GT 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 66 0 0
  ECOLINE PC 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 11 0 0
  ECOLINE PC 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 23 0 0
  ECOLINE PC 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 15 0 0
  ECOLINE PC 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE PC 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 35 0 0
  ECOLINE PC 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 20 0 0
  ECOLINE SC 150 ND 100 mm; RF; Body : A216 WCB; Trim 8 (13%Cr/stellite) 18 0 0
  ECOLINE SC 150 ND 200 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 5 0 0
  ECOLINE SC 150 ND 350 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 4 0 0
  ECOLINE SC 150 ND 50 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 7 0 0
  ECOLINE SC 150 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 6 0 0
  ECOLINE SC 150 ND100 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 1 0 0
  ECOLINE SC 150 ND200 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 5 0 0
  ECOLINE SC 150 ND150 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 6 0 0
  ECOLINE GL 150 ND 100 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 10 0 0
  ECOLINE GL 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 27 0 0
  ECOLINE GL 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 30 0 0
  ECOLINE GT 150 ND 250 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  Eco-BLT 150 ND50 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 33 0 0
  ECOLINE SC 300 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 150 ND 50 mm; RF; Body : ASTM A216 WCB; Trim 8 (13%/stellite) 5 0 0
  ECOLINE GT 150 ND 500 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GT 150 ND 150 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite); Size : ND150 mm 6 0 0
  ECOLINE GT 800 ND20 mm; NPT Trim 8 (13%Cr/stellite): A105 3 0 0
  Eco-BLT 150 ND150 mm; RF; Body : ASTM A216 WCB; SS304 Ball; PTFE seat 3 0 0
  Eco-BLT 150 ND100 mm; RF; Body : ASTM A216 WCB; SS304 Ball; PTFE seat 9 0 0
Ecoline Total   981 0 0
Etanorm Casing Wear Ring, P/N.502.1 8 0 0
  Casing Wear Ring, P/N.502.2 14 0 0
  Deep Grooved Ball Bearing, P/N.321 9 0 0
  Grooved Ball Bearing, P/N.321 8 0 0
  Joint Ring, P/N.411.4 8 0 0
  Joint Ring, P/N.411.5 15 0 0
  O-Ring, P/N.412.1 11 0 0
  O-Ring, P/N.412.2 2 0 0
  Plain Bearing, P/N.310 12 0 0
  Seal Ring, P/N.411.1 39 0 0
  Seal Ring, P/N.411.5 2 0 0
  Seat Ring Holder, P/N.476 39 0 0
  Shaft, P/N.210 2 0 0
  Circlip, P/N.932.1 2 0 0
  Mechanical Seal, P/N.433 24 0 0
  ETANORM G1 80-160 1 0 0
  Bearing 6305-2RS1/C3 20 0 0
  Mechanical Seal P/N.433 17 0 0
Etanorm Total   233 0 0
Etanorm SYA/SYN Bearing Bracket Complete, P/N.330 4 0 0
  Circlip, P/N.932 21 0 0
  Circlip, P/N.932.2 44 0 0
  ETANORM SYA 100-160 2 0 0
  ETANORM SYA 50-160 2 0 0
  ETANORM SYA 65-160 4 0 0
  ETANORM SYA 65-250 4 0 0
  ETANORM SYA 80-160 9 0 0
  ETANORM SYA 80-200 1 0 0
  ETANORM SYA 80-250 8 0 0
  Etanorm SYT 100-200 2 0 0
  Etanorm SYT 100-250 9 0 0
  Etanorm SYT 40-200 1 0 0
  Etanorm SYT 65-160 2 0 0
  Etanorm SYT 65-200 1 0 0
  Etanorm SYT 65-250 1 0 0
  Etanorm SYT 80-160 3 0 0
  Etanorm SYT 80-200 2 0 0
  Joint Ring, P/N.411.3 50 0 0
  Joint Ring, P/N.411.4 21 0 0
  O-Ring, P/N.412.2 19 0 0
  Ring, P/N.500 5 0 0
  Seat Ring Holder, P/N.476 15 0 0
  Support Disc, P/N.550.2 8 0 0
  Etanorm SYT 100-160 1 0 0
  Circlip, P/N.932.3 6 0 0
  ETANORM SYA 100-250 3 0 0
  Etanorm SYT 125-200 1 0 0
  Etanorm SYT 80-250 9 0 0
  Etanorm SYT 50-160 1 0 0
  Etanorm SYT 125-400 SYT8 1 0 0
  Shim Ring, P/N.550.4 3 0 0
  Etanorm SYT 40-250 1 0 0
  Etanorm SYT 32-160 2 0 0
Etanorm SYA/SYN Total   266 0 0
FORGED CHECK SICCA 800 PCF ND15mm SW trim 8 (13%Cr/stellite); A105 6 0 0
FORGED CHECK Total   6 0 0
FORGED GATE SICCA 1500 GTF ND15mm SW trim 8 (13%Cr/stellite); A105 59 0 0
  SICCA 1500 GTF ND20mm SW trim 8 (13%Cr/stellite); A105 49 0 0
  SICCA 1500 GTF ND25mm SW trim 8 (13%Cr/stellite); A105 19 0 0
  SICCA 1500 GTF ND40mm SW trim 8 (13%Cr/stellite); A105 60 0 0
  SICCA 1500 GTF ND50mm SW trim 8 (13%Cr/stellite); A105 47 0 0
  SICCA 800 GTF ND20mm SW trim 8 (13%Cr/stellite); A105 21 0 0
  SICCA 800 GTF ND40mm SW trim 8 (13%Cr/stellite); A105 39 0 0
  SICCA 800 GTF ND50mm SW trim 8 (13%Cr/stellite); A105 40 0 0
  SICCA 1500 GTF ND40mm; SW; Body : A182 F22; trim 5 (double stellite) 8 0 0
  SICCA 1500 GTF ND50mm; SW; Body : A182 F22; trim 5 (double stellite) 8 0 0
  SICCA 1500 GTF ND25mm; SW; Body : A182 F22; trim 5 (double stellite) 6 0 0
  SICCA 1500 GTF ND40 mm; SW; Body : ASTM A182 F22; trim 8 (13%Cr/stellite) 1 0 0
FORGED GATE Total   357 0 0
FORGED GLOBE SICCA 1500 GLF ND 20mm; SW; Body : A182 F22; trim 5 (double stellite) 9 0 0
  SICCA 1500 GLF ND15 mm; SW; Cody : A182 F22 trim 8 (13%Cr/stellite). 20 0 0
  SICCA 1500 GLF ND15mm; SW; Body : A182 F22; Trim 5 (double stellite) 27 0 0
  SICCA 1500 GLF ND25 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 32 0 0
  SICCA 1500 GLF ND25mm; SW; Body : A182 F22; trim 5 (double stellite) 14 0 0
  SICCA 1500 GLF ND40 mm; SW; Body : A182 F22; trim 5 (double stellite) 30 0 0
  SICCA 1500 GLF ND40 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 40 0 0
  SICCA 1500 GLF ND50 mm; SW; Body : A182 F22; trim 5 (double stellite) 66 0 0
  SICCA 1500 GLF ND50 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 43 0 0
  SICCA 1500 GLF ND50 mm; SW; trim 8 (13%Cr/stellite); A105 34 0 0
  SICCA 2500 GLF ND20 mm SW A182 F22 trim 5 (double stellite) 91 0 0
  SICCA 2500 GLF ND25 mm SW A182 F22 Trim 5 (Double stellite) 17 0 0
  SICCA 2500 GLF ND25mm SW trim 8 (13%Cr/stellite); A105 8 0 0
  SICCA 2500 GLF ND40 mm SW A182 F22 Trim 5 (double stellite) 23 0 0
  SICCA 800 GLF ND50mm SW trim 8 (13%Cr/stellite); A105 49 0 0
  SICCA 800 PCF ND20mm SW trim 8 (13%Cr/stellite); A105 5 0 0
  SICCA 800 PCF ND40mm SW trim 8 (13%Cr/stellite); A105 2 0 0
  SICCA 800 GLF ND40mm SW trim 8 (13%Cr/stellite); A105 17 0 0
  SICCA 800 GLF ND15mm SW trim 8 (13%Cr/stellite); A105 74 0 0
  SICCA 800 GLF ND20mm SW trim 8 (13%Cr/stellite); A105 33 0 0
  SICCA 1500 GLF ND20 mm; SW; trim 8 (13%Cr/stellite); A105 75 0 0
  SICCA 1500 GLF ND25 mm; SW; trim 8 (13%Cr/stellite); A105 23 0 0
  SICCA 1500 GLF ND40 mm; SW; trim 8 (13%Cr/stellite); A105 43 0 0
  SICCA 1500 GLF ND 15 mm; SW trim 8 (13%Cr/stellite); A105 15 0 0
  SICCA 2500 GLF ND50 mm SW A182 F22 Trim 5 (double stellite) 49 0 0
  SICCA 2500 GLF ND15mm SW trim 8 (13%Cr/stellite); A105 13 0 0
FORGED GLOBE Total   852 0 0
ISORIA 10-16 Spare liner K Nitrile DN 450 mm for ISORIA 10 15 0 0
  XV EPDM Liner (new generation) ND700 mm for ISORIA 10 4 0 0
ISORIA 10-16 Total   19 0 0
ISORIA 20-25 Spare liner XA EPDM for ISORIA 20 ND150 mm 12 0 0
ISORIA 20-25 Total   12 0 0
LCC Adapter Plate, LCC16, P/N. 145.10 2 0 0
  Adapter, Stuffing Box, 70mm, LCC1; P/N. 450 5 0 0
  Adjusting Nut, OCTAGON, LCC; P/N. 924 1 0 0
  ADJUSTING NUT, OCTAGON, LCC; P/N.924 8 0 0
  ADJUSTING NUT, OCTAGON, P/N.924 2 0 0
  ADJUSTING SCREW, 670MM PEDESTAL, P/N.909 1 0 0
  Adjusting Screw, 670MM PEDESTAL,LCC; P/N. 909 1 0 0
  ADJUSTING SCREW, 670MM PEDESTAL,LCC; P/N.909 8 0 0
  BEARING LOCK NUT, 125MM, SKF AN-2, P/N.923 12 0 0
  Bearing Lock Nut, 70MM, TAN-15; P/N. 923 14 0 0
  BEARING LOCK WASHER, 125MM, TW128, P/N.380 12 0 0
  Bearing Lock Washer, 70MM, TW115; P/N. 380 11 0 0
  CARTRIDGE BEARING HOUSING, 125MM, P/N.350 5 0 0
  FASTENER KIT, CBA, 125MM, OIL FIL, P/N.99-4 5 0 0
  FASTENER KIT, CBA, 3 100MM OIL FI; P/N.99-4 3 0 0
  Fastener Kit, CBA, 70MM; P/N. 99-4 5 0 0
  FASTENER KIT, PEDESTAL, 70MM & 10, P/N.99-4 4 0 0
  Fastener Kit, Pedestal, 70MM & 10; P/N. 99-4 5 0 0
  FASTENER KIT, PEDESTAL, 70MM & 10; P/N.99-4 5 0 0
  FASTENER KIT, SBA, 125MM SHAFT, P/N.99-4 5 0 0
  Fastener Kit, SBA, For 70MM Shaft; P/N. 99-4 11 0 0
  FASTENER KIT, WET END, LCC16 (METAL); P/N. 99-4 13 0 0
  FASTENER KIT, WET END, LCC24/26-XH, P/N.99-4 2 0 0
  Gasket Kit, CBA, 100MM, P/N.99-9 23 0 0
  GASKET KIT, CBA, 125MM, P/N.99-9 26 0 0
  Gasket Kit, CBA, 70MM, P/N.99-9 16 0 0
  Gasket Kit, Shaft Sleeve, 125MM, P/N.99-9 15 0 0
  Gasket Kit, Shaft Sleeve,70 MM, P/N.412.30&400.10 (KIT) 8 0 0
  Gasket Kit, Wet End, LCC16 (METAL), P/N.99-9 15 0 0
  Gasket Kit, Wet End, LCC20 (METAL), P/N.99-9 117 0 0
  GASKET KIT, WET END, LCC24 (METAL)  P/N. 99-9 25 0 0
  GASKET, (IMP./SHAFT SLEEVE); P/N. 400.10 2 0 0
  gasket; P/N. 400.50 1 0 0
  Gland,70MM, P/N.452 17 0 0
  GREASE RETAINER RING, THRUST END  P/N. 63-7 24 0 0
  Impeller, 19-11/16" RH,CS3.5R, 8X20-3ME5-7/16, P/N.230 7 0 0
  IMPELLER, 24", RH, 4.5SR, 10X24,Gasite 29G,  P/N.230 9 0 0
  Inpro Seal, 70MM CBA, P/N.420.50 26 0 0
  Inpro Seal, 70MM CBA, P/N.420.70 12 0 0
  Lantern Ring, 100MM, P/N.458 29 0 0
  Lantern Ring, 125MM , P/N.458 6 0 0
  Lantern Ring, 70MM, P/N.458 8 0 0
  LCC H150-500.4K AB M1 20 0 0
  LCC H200-610.5K AB M1 9 0 0
  LCC M100-400.3K GB M1 16 0 0
  O RING, .275" X 51-15/16"; P/N. 412.01 2 0 0
  O RING, ARP-568-232, .139" X 9"; P/N. 412.30 1 0 0
  OIL SIGHT GAUGE, 1"NPT, LSP151-06; P/N.642 42 0 0
  Packing, 20MM, 145.0, 4/Set, P/N.461 45 0 0
  Pipe Plug, hex socket; P/N.903.71 14 0 0
  Pipe Plug, P/N.903.71 3 0 0
  Pipe Plug; P/N.903.50 & 903.70 18 0 0
  Power Supply Converter 12 VDC to 24 VDC 2 0 0
  Radial Bearing, (100MM),  P/N.322 13 0 0
  RADIAL BEARING, (125MM) 22230ES T, P/N.322 26 0 0
  Radial Bearing, (70MM), P/N.322 18 0 0
  Radial End Cover, 100 MM, P/N.361.50 14 0 0
  Radial End Cover, 125 MM, P/N.361.50 10 0 0
  Radial End Cover, 70 MM, P/N.361.50 8 0 0
  Shaft Key (METRIC) 20 X 12 X 135; P/N. 940 4 0 0
  SHAFT KEY (METRIC) 32 X 18 X 210, P/N.940 5 0 0
  Shaft Sleeve LCC 150-4 SS304 21 0 0
  Shaft Sleeve, 70MM, P/N.524 15 0 0
  Shaft Sleeve, LCC-H 200-610.5K, material SS304 15 0 0
  Shaft Sleeve, P/N.524 ; material SS304 26 0 0
  Shaft, P/N.210 3 0 0
  Shell, 4LCC16 CH3-35 1 0 0
  SHELL, 6LCC20 CH5-3/4 (XH); P/N.101 1 0 0
  SHELL, 8LCC24 CH7 (XH), P/N.101 2 0 0
  Stud, all thread ; P/N. 902.32 4 0 0
  Stud, all Thread; P/N.902.32 3 0 0
  STUD: DOUBLE END, M12X30; P/N. 902.10 36 0 0
  Stuffing Box LCC 150-4 SS304 16 0 0
  Stuffing Box LCC-H 200-610.5K, material : CD4MCu 2 0 0
  Stuffing Box LCC-M 100-400.3K, material : CD4MCu 2 0 0
  SUCTION LINER, 10LCC24 (XH), P/N.13-19 4 0 0
  Suction Liner, 8LCC20 (XH), P/N.13-19 7 0 0
  SUCTION PLATE, 10LCC24 (XH), P/N.16-1 2 0 0
  Suction Plate/Liner, 6LCC16, P/N.16.3 6 0 0
  SWIVEL HOIST RING, M10 X 1.50 X 16.7, P/N.59-47 2 0 0
  SWIVEL HOIST RING, M10 X 1.50 X 16.7; P/N.59-47 2 0 0
  Temperature Gage, P/N.692 9 0 0
  THRUST BEARING SPACER, 100MM; P/N.45-4 5 0 0
  THRUST BEARING SPACER, 125MM, P/N.45-4 11 0 0
  THRUST BEARING, (125MM) 90024, P/N.324 32 0 0
  Thrust Bearing, (70MM), P/N.324 16 0 0
  Thrust End Cover, 100 MM, P/N.361.70 13 0 0
  Thrust End Cover, 125 MM, P/N.361.70 9 0 0
  Thrust End Cover, 70MM, P/N.361.70 8 0 0
  Tuf Pack#100 (3 Rings/Set) 20MM, P/N.461 15 0 0
  Tuf Pack#100(4 Rings/Set) 20 MM, P/N.461 152 0 0
  Vacuum Tank LCC 100 7 0 0
  Shaft Sleeve LCC-H 150-500.4K, material : CD4MCu 13 0 0
  Stuffing Box Housing, 125 mm, P/N.451 6 0 0
  STUD: DOUBLE END, M16DX45L; P/N. 902.01 22 0 0
  STUD: DOUBLE END, M20X55; P/N.902.02 22 0 0
  Clamping Plate, P/N.732 55 0 0
  Pipe Plug ; P/N. 903.60 22 0 0
  Inpro Seal, 100MM CBA, P/N.420.50 17 0 0
  Gasket Kit,Shaft Sleeve, 100MM, P/N.99-9 80 0 0
  FASTENER KIT, SBA, 100MM, DRY DES; P/N.99-4 1 0 0
  STUD: DOUBLE END, M20X55; P/N.902.01 44 0 0
  STUD: DOUBLE END, M20X75; P/N.902.10 44 0 0
  Shaft Sleeve LCC-M 100-400.3K, material : CD4MCu 6 0 0
  STUD: DOUBLE END, M24X55, P/N.902.01 16 0 0
  Shaft Sleeve, 125MM, P/N.524 34 0 0
  Shaft Sleeve, 100MM, P/N.524 31 0 0
  Bearing Lock Washer, 100MM, P/N.380 1 0 0
  SHAFT, 125MM X 1280MM, PLUG 4.5SR, P/N.210 3 0 0
  CARTRIDGE BEARING HOUSING, 100MM; P/N.350 12 0 0
  Cartridge Bearing Housing, 70MM L; P/N. 350 7 0 0
  Gland Packing SLADE 3300G, size 19.05 x 19.05 mm ( 3/4 inch) 6 0 0
  Inpro Seal, 100MM, P/N.420.70 25 0 0
  Impeller, 19-11/16"RH,S9194R, 8X20-, P/N.230 2 0 0
  Stuffing Box, 70mm; P/N. 451 7 0 0
  Stuffing Box, 100MM, P/N.451 8 0 0
  Shell, 3LCC12 CH2-3 1 0 0
  Wear Plate, Wet End Conversion(PLUG 225), P/N.135 1 0 0
  Stuffing Box, 70mm, LCC16, W/INTE; P/N. 451 6 0 0
  M20 FLAT WASHER, P/N.550.10 23 0 0
  STUD: DOUBLE END, M20X75, P/N.902.10 12 0 0
  GASKET, P/N.400.50 2 0 0
  O RING, .275" X 38, P/N.412.70 2 0 0
  Suction Plate/liner,  P/N. 16-3 1 0 0
  Shell,  P/N. 101 1 0 0
  Gland, 100MM, P/N.452 21 0 0
  M20 NUT, P/N.920.10 12 0 0
  GREASE RETAINER RING, THRUST END, 100MM, P/N. 41-1 4 0 0
  GREASE RETAINER RING 2 0 0
  LCC-H150-500.4E ABM1 2 0 0
  LCC-H200-610.5E ABM1 2 0 0
LCC Total   1819 0 0
MDX IMPELLER 67.00, 70.00, 225MM LSA 24X, P/N.480-6866C-04-0028G 1 0 0
  SNAP RING GASKET, LSA-64 HD, SECT “A”, P/N.600-8247P-00-01RUT 2 0 0
  SHAFT SLEEVE SPACER, 225MM PLUG, P/N.654-5958C-00-0FABS 2 0 0
  SPACER/SHAFT SLEEVE GASKET, P/N.621-0482P-10-03MIP 1 0 0
  O” RING, ½” X 75-3/8”, P/N.624-7719P-32-04RUP 2 0 0
  GASKET IMPELLER, P/N.621-0480P-96-03MIP 1 0 0
  SNAP RING GASKET: TBC 64/LSA 64, P/N.600-8240P-00-01RUP 2 0 0
  ADJ. LINER KIT, MDX 600, P/N.674-1950B-15-0001K 2 0 0
MDX Total   13 0 0
Megachem MEGACHEM Cm 80-200 4 0 0
  MEGACHEM Cm 25-150 1 0 0
  Megachem Cm 32 - 250 2 0 0
  Impeller, P/N.230 for Megachem 65-160 1 0 0
Megachem Total   8 0 0
MISCELLANEOUS Coupling - Flender H - 110 / 100 27 0 0
  Coupling - Flender H - 125 / 100 25 0 0
  Coupling - Flender H - 125 / 140 15 0 0
  Coupling - Flender H - 160 / 140 29 0 0
  Coupling - Flender H - 180 / 180 23 0 0
  Coupling - Flender H - 180 / 200 26 0 0
  Coupling - Flender H - 200 / 180 27 0 0
  Coupling - Flender H - 200 / 200 25 0 0
  Coupling - Flender H - 80 / 100 22 0 0
  Coupling - Flender H - 95 / 100 22 0 0
  Martin Pulley SPZ90-3 grooves+SPZ118-3grooves (Complete) 2 0 0
  Taper Bushing No. 3525 MARTIN COUPLING bore diameter 80 mm 3 0 0
MISCELLANEOUS Total   246 0 0
MOTORS TECO Motor 1.1 kW 2P, B3, 50Hz, 380 V 2 0 0
  TECO WESTINGHOUSE 7.5kW/4Pl/50Hz/B3/380V Frame size : 132 M 2 0 0
  TECO WESTINGHOUSE 2.2kW/2Pl/50Hz/B3/380V Frame size : 90 L 3 0 0
MOTORS Total   7 0 0
Movichrom Movitec VCF2-13 ; Motor 1.5 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  Movitec VCF2-16 ; Motor 2.2 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  Movitec VCF2-20 ; Motor 2.2 kW, 2P, IP55 230/400V, 50 Hz 4 0 0
  Movitec VCF2-25 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 5 0 0
  Movitec VCF4-20 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 4 0 0
  Movitec VF45-5-1 ; Motor 15 kW, 2P, IP55 400/692V, 50 Hz 3 0 0
  Movitec VCF 2/24 B 2.2 kW standard 230-400V/2pl/50Hz  EFF1/IE2 2 0 0
  Movitec VF65-4 2 0 0
  Movitec VF18-3 ; Motor 3 kW, 2P, 3 phase, IP55 400/692V, 50 Hz 3 0 0
  SEALKIT FOR VCF 10, P/N.433 14 0 0
Movichrom Total   41 0 0
Movitec Movitec V 10-10  Motor :  5.5 kW/2890 rpm/50Hz/ 230-400V/IP55 2 0 0
  Movitec VCF10-18 ; Motor 7.5 kW, 2P, IP55 400/692V, 50 Hz 4 0 0
  Movitec VCF4-18 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 8 0 0
  Movitec VCF4-23 ; Motor 4 kW, 2P, IP55 400/692V, 50 Hz 6 0 0
  Movitec VCF4-25 ; Motor 4 kW, 2P, IP55 400/692V, 50 Hz 6 0 0
  Movitec VF10-2 ; Motor 0.75 kW, 2P, IP55 1*230V, 50 Hz 1 0 0
  Movitec VCF18-12 ; Motor 11 kW, 2P, IP55 400/692V, 50 Hz 2 0 0
  Movitec VCF 32 -12 ; Bare pump only 1 0 0
  Mechanical Seal Cartridge Kit VF24/32/45/65, P/N.433 1 0 0
  Bearing Motor 4Kw for Movitec 4-25 6306-2Z/C3 1 0 0
  SEALKIT FOR VCF 4, P/N.433 4 0 0
  SEALKIT FOR VCF 2, P/N.433 14 0 0
  Impeller, P/N.230.02 3 0 0
  Spacer Sleeve, P/N : 525.04 3 0 0
  Spacer Sleeve De-Staging, P/N : 525.08 16 0 0
  Spacer Casing Upper, P/N : 108.06 3 0 0
  Stage Casing Upper, P/N.108.06 16 0 0
  RMG12/12-G606 (U3BEGG) 6 0 0
  RMG12/16-G606 (Q1BEGG) 8 0 0
  RMG12/12-G606 (Q1BEGG) 15 0 0
  RMG12/16-G606 (U3BEGG) 4 0 0
  RMG12/25-G606 (U3BEGG) 8 0 0
Movitec Total   132 0 0
Multitec Gland Packing, P/N.461 8 0 0
  MTC C 50/10-04.1 10.66 1 0 0
  Sleeve, P/N.520.1 & 520.2 8 0 0
  Spacer Sleeve, P/N.525.1 & 525.2 8 0 0
  MTC C 50/08-03.1 10.66 3 0 0
  Mechanical Seal, P/N.433.1 1 0 0
  Bearing 6309ZZC3 brand SKF 4 0 0
  Shaft Protecting Sleeve, P/N.524 2 0 0
Multitec Total   35 0 0
Omega Omega 100-250 A (GB) 1 0 0
  Omega 150-460 A (GB) 2 0 0
  Omega 200-520 A (GB) 1 0 0
  Omega 80-270 A (GB) 2 0 0
Omega Total   6 0 0
OTH.BUTTERFLY VALVES KE T1 : 3I.6kF.FS ND150 mm c/w SR330 Lever 17 0 0
  KE T1 : 3I.6kF.FS ND200 mm c/w MR25 Gearbox 32 0 0
  KE T1 : 3I.6kF.FS ND250 mm c/w MR50 Gearbox 4 0 0
  KE T1 : 3I.6kF.FS ND300 mm c/w MR50 Gearbox 7 0 0
  KE T1 : 3I.6kF.FS ND50 mm c/w SR260 Lever 18 0 0
  KE T1 : 3I.6kF.FS ND80 mm c/w SR260 Lever 22 0 0
OTH.BUTTERFLY VALVES Total   100 0 0
RDL / RDLO Key, P/N.940.2 9 0 0
  Parallel Key, P/N.940.2 9 0 0
  Shaft Nut, P/N.921.2 4 0 0
  V-Ring, P/N.411.2 8 0 0
  Spacer Ring, P/N.504 1 0 0
  Spacer Sleeve, P/N.525 4 0 0
RDL / RDLO Total   35 0 0
RPH / RPHB RPH S5 150-360 1 0 0
  RPH S5 40-361 2 0 0
  RPH S5 80-360 1 0 0
  RPH S6 80-450 3 0 0
RPH / RPHB Total   7 0 0
STRAINERS BOA-S  Cast Iron JL 1040 DN15mm 15 0 0
  BOA-S Cast iron JL 1040 DN100mm 7 0 0
  BOA-S cast iron JL 1040 DN125mm 10 0 0
  BOA-S Cast Iron JL 1040 DN150mm 8 0 0
  BOA-S Cast Iron JL 1040 DN200mm 15 0 0
  BOA-S Cast iron JL 1040 DN250mm 5 0 0
  BOA-S cast iron JL 1040 DN25mm 24 0 0
  BOA-S cast iron JL 1040 DN80mm 10 0 0
  BOA-S Cast iron JL 1040 DN50 mm 25 0 0
  BOA-S cast iron JL 1040 DN40mm 11 0 0
STRAINERS Total   130 0 0
Vacuum Pump Bushing, Crank-Pin, P/N.30210199 1 0 0
  GASKET-FRAME END COV, P/N.30439319 5 0 0
  KIT-SHAFT SEAL-2475- (Key Woddruff), P/N.95433173 16 0 0
  KIT-SHAFT SEAL-2475-, P/N.32204539 superceded by P/N.32499949 7 0 0
  Ring Set, P/N.32194151 11 0 0
  ROD CONECTING, P/N.32004152 4 0 0
  Vacuum Pump - Ingersollrand - V244 5 0 0
  Valve Finger, P/N.30221170 30 0 0
  GASKET-FLANGE, P/N.30289870 superceded by P/N.30259870 15 0 0
  GASKET-4"AIR HEAD P/N.30279038 superceded by P/N.32267551 6 0 0
  GASKET-4"AIR HEAD SP, P/N.30280515 superceded by P/N.32267544 6 0 0
  GASKET-SHAFT END COV, P/N.30294995 9 0 0
  Piston, Air-Complete, P/N.30215263 4 0 0
  Cylinder, P/N. 37128535 2 0 0
Vacuum Pump Total   121 0 0
VALVES SPARES Spare liner XA EPDM for ISORIA 20 ND100 mm 9 0 0
  Spare liner XV EPDM for DN 350 mm for ISORIA 10 2 0 0
  XV EPDM liner for ISORIA 10 ND100mm 3 0 0
  ISORIA NG ND150 XV Liner 1 0 0
  Spare liner XV EPDM ND600 mm for ISORIA 10 1 0 0
VALVES SPARES Total   16 0 0
WK / WL Balance Disc WLN 250, P/N.601 5 0 0
  Key First Stage, P/N.940.3 5 0 0
  O-Ring, P/N.412.1 3 0 0
  Packing Ring, P/N.461 17 0 0
  Seal Ring, P/N.411.1 3 0 0
  Shaft Protecting Sleeve, P/N.524.1 1 0 0
  Shaft, P/N.210 1 0 0
  Balance Disc Seat WLN 250, P/N.602 4 0 0
  WK 50/6 1 0 0
  Seal Ring, P/N.411.4 5 0 0
  Impeller, P/N.230 4 0 0
  Key Coupling, P/N.940.1 2 0 0
  Key Balance Disc, P/N.940.4 2 0 0
  Bearing Clamp, P/N.571 1 0 0
  Gasket, P/N.400.3 3 0 0
  Split Bearing, P/N.370 2 0 0
  Stage Bush, P/N.541 8 0 0
  Gasket, P/N.400.2 7 0 0
  O-Ring, P/N.412.3 3 0 0
WK / WL Total   77 0 0
WKL Casing Wear Ring, P/N.502 3 0 0
  O-Ring, P/N.412.2 4 0 0
  Plug, P/N.903.2 10 0 0
  Seal Ring, P/N.411.5 2 0 0
  Mechanical Seal, P/N.433 1 0 0
  Seal Ring, P/N.411.3 7 0 0
  Locating Pin, P/N.562 6 0 0
  Plug, P/N.903.1 5 0 0
  Seal Ring, P/N.411.2 2 0 0
  Neck Bush, P/N.542 3 0 0
WKL Total   43 0 0
(blank) Air Release and Vacuum Break Valves; 080RGX1641 – 80mm Ventomat Series ‘RGX’ 5 0 0
  Angular Contact Ball Bearing, P/N.320 4 0 0
  Aquaflow 100x75-420 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 5 0 0
  Aquaflow 40x32-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 2 0 0
  Aquaflow 50x32-250 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 5 0 0
  Aquaflow 50x40-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 20 0 0
  Aquaflow 80x50-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 2 0 0
  Aquaflow 80x50-330 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  AQUAVANE 100-320/B 13 0 0
  AQUAVANE 100-320/D 1 0 0
  AQUAVANE 125-320/B 2 0 0
  AQUAVANE 125-400/B 1 0 0
  AQUAVANE 250-400/B 2 0 0
  AQUAVANE 40-320/A 3 0 0
  AQUAVANE 50-320/D 4 0 0
  AQUAVANE 65-320/D 2 0 0
  Bearing Bracket Complete, P/N.330 7 0 0
  Bearing Bracket, P/N : 330 4 0 0
  Bearing Cover, P/N : 360 5 0 0
  Bearing Cover, P/N : 360, 5 0 0
  BOA-H cast iron JL 1040 DN200mm 9 0 0
  BOA-H Nodular cast iron JS 1025; PN25; DN150mm 4 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN65mm 2 0 0
  BOA-R Cast Iron JL 1040 DN100mm 20 0 0
  BOA-R cast iron JL 1040 DN125mm 10 0 0
  BOA-R Cast Iron JL 1040 DN150mm 15 0 0
  BOA-R Cast Iron JL 1040 DN200mm 10 0 0
  BOA-R Cast iron JL 1040 DN25mm 3 0 0
  BOA-R Cast iron JL 1040 DN40mm 6 0 0
  BOA-R Cast iron JL 1040 DN80mm 17 0 0
  Bush, P/N.602 6 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 400;Conn B16.5 cl 150 c/w MR 100 Gearbox 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 450;Conn B16.5 cl 150 c/w MR 100 Gearbox 1 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 300;Conn B16.5 cl 150 c/w CR 510 Lever Handle 15 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 400;Conn B16.5 cl 150 c/w MR 100 Gearbox 2 0 0
  Casing Wear Ring, P/N : 502.1 27 0 0
  Casing Wear Ring, P/N : 502.2 14 0 0
  Casing Wear Ring, P/N.502 8 0 0
  Casing Wear Ring, P/N.502.1 39 0 0
  Casing Wear Ring, P/N.502.2 22 0 0
  Circlip, P/N. 932.3 31 0 0
  COUPLING - Flender - B110 (complete) 33 0 0
  COUPLING - Flender - B125 (complete) 5 0 0
  COUPLING - Flender - B140 (complete) 33 0 0
  COUPLING - Flender - B160 (complete) 35 0 0
  COUPLING - Flender - B180 (complete) 33 0 0
  COUPLING - Flender - B200 (complete) 63 0 0
  COUPLING - Flender - B225 (complete) 47 0 0
  COUPLING - Flender - B80 (complete) 51 0 0
  Coupling - Flender H - 95 / 140 (complete) 2 0 0
  Coupling - Martin - F120F 4 0 0
  Coupling - Martin - F140F 7 0 0
  Coupling - Master - F180F 1 0 0
  CPK U 65-250 1 0 0
  Diesel Engine VOLVO type: TAD1643VE, Power 565 kW @ 1800 rpm, Standard Industrial 2 0 0
  Eco-BLC 1000 WOG ND10mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 50 0 0
  Eco-BLC 1000 WOG ND20 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 59 0 0
  Eco-BLC 1000 WOG ND20mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 75 0 0
  Eco-BLC 1000 WOG ND25 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 68 0 0
  Eco-BLC 1000 WOG ND25mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 15 0 0
  Eco-BLC 1000 WOG ND32mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 40 0 0
  Eco-BLC 1000 WOG ND40 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 45 0 0
  Eco-BLC 1000 WOG ND40mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 25 0 0
  Eco-BLC 1000 WOG ND50 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 48 0 0
  Eco-BLT 150 ND100 mm; RF; Body : ASTM A351 CF8M; PTFE seat 10 0 0
  Eco-BLT 150 ND15 mm; RF; Body : ASTM A351 CF8M; PTFE seat 25 0 0
  Eco-BLT 150 ND20 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 36 0 0
  Eco-BLT 150 ND20 mm; RF; Body : ASTM A351 CF8M; PTFE seat 25 0 0
  Eco-BLT 150 ND25 mm; RF; Body : ASTM A351 CF8M; PTFE Seat 21 0 0
  Eco-BLT 150 ND32 mm; RF; Body : ASTM A351 CF8M; PTFE seat 19 0 0
  ECOLINE SC 150 ND 50 mm; RF; Body : A351 CF8; trim 2 (304/304) 5 0 0
  ECOLINE SC 150 ND 80 mm; RF; Body : A351 CF8; trim 2 (304/304) 5 0 0
  Fastener Kit, Wet End, P/N.99-4 3 0 0
  Gasket Kit, SBA, LLC16 on 70 MM, P/N.99-9 34 0 0
  Grooved Ball Bearing ,P/N : 321 20 0 0
  Grooved Ball Bearing, P/N : 321 22 0 0
  Impeller, 15.55",RH, S9194R, 6X16-3ME-11/32, P/N.230 5 0 0
  Impeller, P/N : 230 24 0 0
  Impeller, P/N 411.1 2 0 0
  Inpro Seal, 125MM CBA, P/N.420.50 31 0 0
  Inpro Seal, 125MM CBA, P/N.420.70 40 0 0
  Interstage Sleeve, P/N.521 2 0 0
  Joint Ring, P/N : 411.3 55 0 0
  Joint Ring, P/N : 411.4 60 0 0
  Joint Ring, P/N.411.3 47 0 0
  Joint Ring, P/N.411.4 5 0 0
  Joint Ring, P/N.411.5 16 0 0
  Martin parts - F100F Taper Bush 2 0 0
  Martin Parts - F120F Rubber 2 0 0
  Martin Parts - F140F Taper Bush 5 0 0
  Martin Parts  F180F - Rubber 5 0 0
  Martin Parts  F180F - taper Bush 4 0 0
  Mechanical seal 4 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 35 EagleBurgmann 11 0 0
  Mechanical Seal, P/N : 433 32 0 0
  MEGACHEM C 40-160 1 0 0
  MEGACHEM Cm 50-250 2 0 0
  MOVIBOOST VP 2/1003 1 0 0
  Movitec VCF10-20 ; Motor 7.5 kW, 2P, IP55 400/692V, 50 Hz 3 0 0
  O-ring ID:151.764 x 5.33; Material : NBR 24 0 0
  O-ring ID:81.915 x 5.33; Material : NBR 7 0 0
  O-Ring, P/N : 411.1 5 0 0
  O-Ring, P/N : 412 5 0 0
  O-Ring, P/N : 412.1 32 0 0
  O-Ring, P/N : 412.2 5 0 0
  O-Ring, P/N.412.1 43 0 0
  Plain Bearing, P/N : 310 22 0 0
  PLC control Omron 6 0 0
  Pressure Gauge Diaphragm model BDT18/A, c/w Flush Ring, Brand Badotherm 1 0 0
  Pressure Gauge Diaphragm model DCS101, Brand Schuh, Range 0~16 bar 4 0 0
  Ring, P/N. 500 13 0 0
  Ring, P/N.500 20 0 0
  Seat Ring Holder, P/N : 476 25 0 0
  Set of Gasket and O-Ring for MTC 50, P/N.411 & 412 10 0 0
  Shaft Key, P/N.940 8 0 0
  Shaft, 100MM X 46-21/32", PLUG CS3.5R, P/N.210 6 0 0
  Shaft, P/N : 210 23 0 0
  Shaft, P/N.210 37 0 0
  Shaft, P/N.210 for MTC 50/10 4 0 0
  Shaft, P/N.210 for MTC 50/8 2 0 0
  SICCA 2500 GLF ND20mm SW trim 8 (13%Cr/stellite); A105 23 0 0
  SICCA 2500 GLF ND40mm SW trim 8 (13%Cr/stellite); A105 17 0 0
  SICCA 2500 GLF ND50mm SW trim 8 (13%Cr/stellite); A105 24 0 0
  Siemens Motor 18.5 kW 2P, B3 1 0 0
  Sleeve, P/N : 520 8 0 0
  Spacer Sleeve, P/N : 525 12 0 0
  Spare Parts Kit, P/N : 99-28.2 52 0 0
  STUD, ALL THREAD, M20X145, 300 SERIES SS , P/N. 902.32 6 0 0
  Suction Plate, 8LCC20 (XH), P/N.16-1 4 0 0
  Support Disc, P/N.550.1 13 0 0
  Support Disc, P/N.550.2 28 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 24 mm w/ bolt 6 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 36.5 mm w/ bolt 7 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 55 mm w/ bolt 6 0 0
  V-Belt SPA 1800 4 0 0
  V-belt SPA 1900 6 0 0
  V-belt SPA 2000 8 0 0
  V-RING FOR MTC 65 (P/N. 411) 4 0 0
  V-Rings, P/N. 411 11 0 0
  WESTIN Motor 75 kW 2P, B3 1 0 0
  XV EPDM liner ND500 mm for ISORIA 10 6 0 0
  Y-type stariner ND 25 mm NPT Brass body; SS304 strainer insert 1 0 0
  Circlip, P/N.932.1 10 0 0
  Circlip, P/N : 932.2 20 0 0
  MEZ Motor 4 kW 2P, B3 1 0 0
  Shim Ring, P/N.550.4 10 0 0
  ISORIA 10 T1 3t6k6XV ND 50mm C/w Actair 3 1 0 0
  Eco-BLC 1000 WOG ND15 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 3 0 0
  Siemens motor 1.5kW/4pl/3ph/400V/50Hz EExde IIC T4, Explosion proof type 2 0 0
  Mechanical Fuel Gauge, Moeller, 11-3/4" depth 8 0 0
  AQUAVANE 50-130/D 1 0 0
  Mechanical Seal, P/N.433 9 0 0
  Mechanical Fuel Gauge, Moeller, 17-3/4" depth 27 0 0
  Eco-BLC 1000 WOG ND32 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 25 0 0
  Angular Contact Ball Bearing, P/N : 321.1 1 0 0
  SICCA 1500 GLF ND20 mm; SW; Body : A182 F22 trim 8 (13%Cr/stellite). 28 0 0
  Elektrim Motor 7.5 kW 2P, B3 2 0 0
  CMG Motor Exd 5.5kW/2PL/3PH/50Hz Class I, Zone I, Group IIA & IIB, T4 (PPD Series) 1 0 0
  Support Disc, P/N : 550.1/2 14 0 0
  Amarex KRT E65-210/022 UG-125 1 0 0
  Washer, P/N : 550.3 7 0 0
  Stud, P/N : 902.1 20 0 0
  Circlip, P/N : 932.1 20 0 0
  ECOLINE FY 150 ND 100 mm; RF; Body : ASTM A216 WCB; SS304 Screen 5 0 0
  ISORIA 10 T1 : 3T.6K.2.VC ND80mm c/w SR180 lever 8 0 0
  Eco-BLT 150 ND40 mm; RF; Body : ASTM A351 CF8M; PTFE Seat 24 0 0
  CPK GC 65-315 2 0 0
  Stud, P/N : 902.2 20 0 0
  Eco-BLT 150 ND50 mm; RF; Body : ASTM A351 CF8M; PTFE seat 19 0 0
  Movitec VCF18-10 ; Motor 11 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  SISTO 10 PN 10 DN 50mm Body JL1040 1 0 0
  MEGA GCm 80-250 1 0 0
  Pedestal, 670MM, LCC DRY DESIGN, 70MM, P/N.18-2 4 0 0
  SICCA GLF 2500;DN 15 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 11 0 0
  SICCA GLF 2500;DN 50 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 2 0 0
  VEM Motor 90kW/2P/3ph/400V/50Hz/IMV1/F/IP55/Frame:280M 1 0 0
  Siemens Motor 1LG4-317-2AB60-Z 200 kW/2P/B3/400V/50Hz/F/IP55/Frame: 315L 3 0 0
  Pressure Gauge Diaphragm model LFBSPG-V-CSU, Flushed type Diaphragm 54 0 0
  General Brand Pressure Gauge dual reading0-40 bars/0-600 lb/in2 dia.4".Conn.NPT1/2";glycerin display 12 0 0
  Coupling - Flender H - 160 / 100 (complete) 8 0 0
  General Brand  Pressure Gauge reading -760mmHgto15 bars diameter 4".Conn. NPT1/2";glycerin display 5 0 0
  General Brand Pressure Gauge dual reading0-60bars/0-850 lb/in2 dia.4".Conn.NPT1/2";glycerin display 5 0 0
  COUPLING - Flender - B250 (complete) 1 0 0
  AQUAVANE 125-400/D 1 0 0
  Butterfly valve BOAX-B T2.3G.6K.6g.XC;DN 250;Conn All Connection c/w MR 25 Gearbox 34 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 42 mm w/ bolt 2 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 100; All Connection; c/w CR 230 Lever Handle 76 0 0
  SICCA GLF 2500;DN 40 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 18 0 0
  Wika Pressure Gauge dual reading 0-25 bars and 0-350 lb/in2 dia. 4".Conn.NPT1/2"; display oil filled 3 0 0
  FASTENER KIT WET END, P/N : 638-K0000-05-0001K 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 200; All Connection; c/w CR510 Lever Handle 3 0 0
  ECOLINE GT 150 ND 600 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  Gasket 3/4" 150# x 3mmT (27mmID x 57mmOD x 3mmT) graphite / asbestos free 1 0 0
  V-Ring, P/N.411.2 1 0 0
  Booster Control Advanced Pp 3 8 0 0
  Booster control advanced 6 Pp 5 0 0
  Vent Plug, P/N.672 5 0 0
  Butterfly Valve BOAX B T2.3G.6K.6.XC; DN 150; Conn All Connection; c/w CR300 Lever Handle 11 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 200; All Connection; c/w MR25 Gearbox 57 0 0
  Accu 12V / 200AH 1 0 0
  Mechanical Fuel Gauge, Moeller, 8" depth 11 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 300;Conn B16.5 cl 150 c/w CR 510 Lever Handle 1 0 0
  Bearing SKF NU 410 C3 5 0 0
  Bearing  SKF 7311 BEP 341 E 4 0 0
  Butterfly Valve BOAX-B T2.3g.6k.6g.XC; DN 250; Conn All Connection c/w CR510 Handle 13 0 0
  pressure gauge NPT 1/4" 1 0 0
  RING:LANTERN 225MM PLUG; U FRAME FOR GIW PUMP MDX600 SUIT CYCLONE, P/N : 618-0946A -00-0148B 2 0 0
  Coupling - Flender H - 180 / 140 (complete) 4 0 0
  Butterfly Valve BOAX B T2.3G.6K.6.XC; DN 65; Conn All Connection; c/w CR165 Lever Handle 9 0 0
  Clarke's engine instrument panel Assm, 24V ETR 1 0 0
  Elektrim Motor 37 kW 2P, B3 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 350;Conn EN1092 PN 10 c/w MR 50 Gearbox 3 0 0
  Pressure gauge with glyserin "FTB" 0-25 Bar DN. 1/2" NPT 1 0 0
  O-Ring, P/N.412 2 0 0
  Bearing SKF NU 2209 EC 2 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 350;Conn EN1092 PN 16 c/w MR 50 Gearbox 9 0 0
  Spacer Sleeve, P/N.525.2 4 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 350;Conn B16.5 cl 150 c/w MR 50 Gearbox 6 0 0
  Bearing FAG 6311 C3 2 0 0
  Bearing SKF 63152Z 4 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 40; All Connection; c/w CR165 Lever Handle 11 0 0
  Mechanical Seal, P/N. 433.02 1 0 0
  SKF Bearing 32234 2 0 0
  Controller for Booster Pump VF18-3 type BCA3E 1 0 0
  Bearing H 210 4 0 0
  Sight Glass 1/2" 1 0 0
  Set of Gasket MTC 100, P/N. 99-9.1 2 0 0
  Val-matic Swing-Flex Check Valve Dia. 4 inches #504A.3 8 0 0
  Gasket Set, P/N.400403SET 2 0 0
  Set of anti friction MTC 100, P/N. 99-20.4 1 0 0
  Val-matic Swing-Flex Check Valve Dia. 8 inches #508A.3 ( see remarks for MOC) 15 0 0
  Bearing 6309 ZZ/C3 4 0 0
  Bearing NU 210 EK SKF 13 0 0
  Set of Gasket RO, P/N. 99-9.3 2 0 0
  Diesel Engine VOLVO type: TAD1343VE, Power 332 kW @ 2100 rpm, Standard Industrial 5 0 0
  M20 NUT, SS (304 CR 18-8) , P/N. 920.32 5 0 0
  Set of Piston MTC 100 RO, P/N. 99-20.2 1 0 0
  M20 FLAT WASHER, 300 SERIES SS , P/N. 550.32 5 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 450;Conn EN1092 PN 10 c/w MR 100 Gearbox 1 0 0
  O-Ring, P/N. 412.1 1 0 0
  Relay Omron 5 0 0
  BEARING 6208 /C3 8 0 0
  Casing Wear Ring, P/N. 502.1 1 0 0
  Val-matic Swing-Flex Check Valve Dia. 6 inches #506A.3 14 0 0
  BOA-RVK DN40mm 2 0 0
  Repair Set RO MTC 100/125, P/N. 99-20.1 1 0 0
  Coupling - Flender H - 110 / 140 (complete) 15 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 50; All Connection; c/w CR165 Lever Handle 97 0 0
  Radial Ball Bearing 6305 - C3 2 0 0
  PACKING:PREFOR MED 0.750IN; 11.000; 5EA/SET P/N : 461 1 0 0
  ABB Motor 22 kW type1HX + 200 MLB 2, 400V/2940 rpm/3ph/50Hz/F/IP55/Frame :200ML 1 0 0
  ABB Motor 30 kW type1HX + 200 MLC 2, 400V/2935 rpm/3ph/50Hz/F/IP55/Frame :200ML 1 0 0
  ABB Motor 2.2 kW type 1HX + 100LB 2, 400V/2830 rpm/3ph/50Hz/F/IP55/Frame :100LB 2 0 0
  Mechanical Seal, P/N : 433.02 8 0 0
  ***BEARING 6213 ZZ/C3 2 0 0
  Mechanical Seal M7N4 / Q1Q1VGG for Omega 250-600A 1 0 0
  ABB Motor 30 kW type 1HX + 225 SMB 4, 400V/1470 rpm/3ph/50Hz/F/IP55/Frame :225SM 1 0 0
  Coupling - Flender H - 140 / 250 (Complete) 24 0 0
  Impeller, P/N.230 for MTC 50/X 4.1 1 0 0
  ABB Motor 4 kW type 1HX + 132 SMB 2,400V/2870 rpm/3ph/50Hz/F/IP55/Frame :132SM 1 0 0
  ABB Motor 18.5 kW type 1HX + 180 MLC 4, 400V/1460 rpm/3ph/50Hz/F/IP55/Frame :180ML 1 0 0
  XV EPDM Liner ND100mm 2 0 0
  XV EPDM Liner ND150mm 2 0 0
  Val-matic Swing-Flex Check Valve Dia. 12 inches #512A.3 2 0 0
  XV EPDM Liner ND200mm 3 0 0
  Gland Packing Set for LCC, Size 3/4", Material: PTFE 90 0 0
  Coupling - Flender H - 200 / 140 (complete) 25 0 0
  Leval Indicator, P/N.638 4 0 0
  ABB Motor 5.5 kW type 1HX + 132 SMC 2,400V/2865 rpm/3ph/50Hz/F/IP55/Frame :132SM 1 0 0
  De-Staging Kit V(C/S) B 10, P/N : 525.08 6 0 0
  De-Staging Kit V(S)F 24/32/45/65, P/N : 525.08 6 0 0
  De-Staging Kit V(C/S) B 15, P/N : 525.08 4 0 0
  De-Staging Kit VCF B 2/4/6, P/N : 525.08 10 0 0
  Automatic Grease Dispenser, 25GFP 5 0 0
  Shaft Sleeve SCCAP, 125 MM, P/N.524 1 0 0
  Shaft Sleeve SCCAP, 100 MM, P/N.524 6 0 0
  Pressure Transducer SEN-3251 C535, range - (minus) 1 ~ 5 bar 4 0 0
  Pressure Transducer  PAS-G EE 4 S 4 N S 0 0 4 0 0
  V-Ring, P/N : 411, ID : 90 mm, Material : NBR 2 0 0
  V-Ring V-28A (P/N: 411), size : V-28A, Material : NB60 for MTC 50 2 0 0
  Mechanical Seal, P/N.433.01 5 0 0
  O-Ring, P/N : 412, Size : 72 x 4 mm, Material :  NBR 2 0 0
  Mechanical Seal, P/N.433.2 3 0 0
  V-Ring V-32A (P/N: 411), size : V-32A, Material : NB60, for MTC 65 4 0 0
  Joint Ring, P/N : 411.4, Size : AT 177/186.5 X1 Material: Graphite 4 0 0
  Mechanical Seal, P/N.433.4 3 0 0
  Grease Fitting, Type 205200 14 0 0
  Pulley SPA 6",2 grovees, steady, bore 100 mm 2 0 0
  ECOLINE GT 150 ND 300 mm; RF; Body ; ASTM A216 WCB; trim 8 (13%Cr/stellite) 5 0 0
  ECO-BLT 150; Size DN 250 mm; A216 WCB body; ball SS304; Seat PTFE; RF; Gear operated 1 0 0
  ECO-GT 800; Size DN 15 mm; Body A105; Trim 8(stellite/13% Cr); NPT 29 0 0
  Trunnion Ball Valve;Class 600;DN 150;Body A216 WCB;Ball F304;Seat F304+RPTFE;Conn RF;Gear Operated 1 0 0
  Globe Valve ECOLINE-GL 600; Class 600; DN 80;Body A216WCB;Trim 8;Conn RF Flanged ANSI#600;Handwheel 2 0 0
  Gate Valve ECOLINE-GT 800; Class 800; DN 20; Body A105; Trim 316L/316L; Conn NPT; Handwheel Actuator 7 0 0
  Ball Valve; Class 800; DN 15; Body A105; Ball A182 F304; Seat RPTFE; Conn NPT; Lever Handle 7 0 0
  Gate Valve ECOLINE-GT 150; Class 150; DN 150; Body A216 WCB; Trim 8; Conn B16.5 cl 150;Gear Actuator 12 0 0
  Mechanical Seal Kit Complete, P/N : 433.02 3 0 0
  Set of Gasket, P/N: 400.11 & 400.12 1 0 0
  Set of O-ring, P/N:412 1 0 0
  Impeller, P/N.230 for MTC 50/X 4.1 Dia 158 mm 4 0 0
  Check Valve Ecoline-SC 600; Class 600; DN 150 ;Body A216 WCB; Trim 8; Conn RF Flange End ANSI #600 3 0 0
  Butterfly Valve DANAIS MT II 300; DN 150, T1.1.6e.6.FA; Conn B16.5 cl 300; c/w SM530 Lever Handle 2 0 0
  V-Belt SPA 1180 8 0 0
  Set accessories, P/N : 99-3 1 0 0
  Joint ring 381/404X4.5 1 0 0
  ECO-GT 800; Size DN 25 mm; Body A105; Trim 8(stellite/13% Cr); NPT 1 0 0
  ECF110 FOR DN150 (Adaptor) 1 0 0
  Grooved Packing A; P/N 411 2 0 0
  Joint ring C; P/N 411 2 0 0
  ECO-SC 600; Size DN 150 mm; Body A216 WCB; Trim 8 (Stellite/13% Cr); RF 3 0 0
  Ball Valve; Class 150; DN 200; Body A216 WCB; Stem ANSI4140; Ball A105+ENP;Seat PTFE;Conn RF Flanged 3 0 0
  ECO-BLT 150; Size DN 50 mm; A216 WCB body; ball SS304; Seat PTFE; RF; Lever Handle 2 0 0
  Gate Valve ECOLINE-GT 600; Class 600; DN 150; Body A216WCB;Trim 8;Conn B16.5 cl 600; Gear Actuator 7 0 0
  ECO-BLT 150; Size DN 80 mm; A216 WCB body; ball SS304; Seat PTFE; RF; Lever Handle 2 0 0
  Trunnion Ball Valve;Class 600;DN 100;Body A216 WCB;Ball F304; Seat F304+RPTFE;Conn RF;Lever Handle 1 0 0
  Gate Valve ECOLINE-GT 150; Class 150; DN 200; Body A216 WCB; Trim 8; Conn B16.5 cl 150;Gear Actuator 22 0 0
  ### Change to PA05607008 (Electrical System for Dewatering Priming 24 VDC) 1 0 0
(blank) Total   3577 0 0
DIN CHECK VALVES BOA-RVK DN25mm 2 0 0
DIN CHECK VALVES Total   2 0 0
SNW Impeller nut, P/N : 922 1 0 0
SNW Total   1 0 0
ACTUATOR SPARES Rotex Solenoid  Valve Type :  VAD213NC 2 0 0
  Rotex Manual Override Type : 450 10 0 0
  Rotex Electropneumatic Positioner Type : RTX 1000 1 0 0
ACTUATOR SPARES Total   13 0 0
WKT Constant Level Oiler, P/N.638 1 0 0
WKT Total   1 0 0
Mega Flat Gasket, P/N.400.3 2 0 0
Mega Total   2 0 0
Etaline Impeller, P/N : 230 2 0 0
  Mechanical Seal, P/N : 433 6 0 0
  Mechanical Seal, P/N.433 4 0 0
Etaline Total   12 0 0
Control Valves MIL Control Valve NPS.1", Class 600, Flange, Accessories:AS/SVP 1 0 0
Control Valves Total   1 0 0
RDLO Parallel Key, P/N.940.1 4 0 0
  Lock Washer, P/N.931 4 0 0
RDLO Total   8 0 0
RPK Angular Contact Ball Bearing, P/N.320.02, SKF 7309 BECBM 1 0 0
  Constant level Oiler, P/N : 638 10 0 0
RPK Total   11 0 0
HG Spacer Ring, P/N.504 5 0 0
HG Total   5 0 0
Grand Total-End of Report   9924 0 0
KSB Indonesia Stock Status
Data Updated As of
Feb-07-2014 19:52
Itemgroup (All)
    Data    
prod grp itemname On Hand SO booked PO booked
Aquachem AQUACHEM 150x125-315 (SS304/SS304/SS304/Mech. seal) 2 0 0
  AQUACHEM 50x32-160 (SS304/SS304/SS304/Mech. seal) 4 0 0
  AQUACHEM 50x32-200 (SS304/SS304/SS304/Mech. seal) 1 0 0
  AQUACHEM 65x40-200 (SS304/SS304/SS304/Mech. seal) 1 0 0
  AQUACHEM 65x50-125 (SS304/SS304/SS304/Mech. seal) 2 0 0
  AQUACHEM 80x50-200 (SS304/SS304/SS304/Mech. seal) 4 0 0
Aquachem Total   14 0 0
Aquaflow Aquaflow 100x75-300 (SSCMA/SSCMA/SS304/Mech. Seal)Impeller Dia. 280 mm, P/N. AVFK308S 5 0 0
  Aquaflow 150x100-300 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  Aquaflow 50x32-250 (SSCMA/SSCMA/SS304/Mech. seal) 3 0 0
  Aquaflow 50x40-330 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  Aquaflow 80x50-250 (SSCMA/SSCMA/SS304/Mech. seal) 20 0 0
  Aquaflow 80x50-280 (SSCMA/SSCMA/SS304/Mech. seal) 1 0 0
Aquaflow Total   37 0 0
Aquavane Aquaflow 80x50-280 (SS304/SS304/SS304/Mech. seal) 6 0 0
  AQUAVANE 100-160/A 4 0 0
  AQUAVANE 100-200/B 2 0 0
  AQUAVANE 100-260/A 4 0 0
  AQUAVANE 100-260/B 4 0 0
  AQUAVANE 125-200/B 2 0 0
  AQUAVANE 125-320/A 1 0 0
  AQUAVANE 150-200/A 1 0 0
  AQUAVANE 200-400/A 6 0 0
  AQUAVANE 200-400/D 1 0 0
  AQUAVANE 32-130/A 5 0 0
  AQUAVANE 32-130/B 9 0 0
  AQUAVANE 32-260/A 9 0 0
  AQUAVANE 40-130/B 3 0 0
  AQUAVANE 40-160/A 2 0 0
  AQUAVANE 40-160/B 8 0 0
  AQUAVANE 40-260/A 4 0 0
  AQUAVANE 40-260/B 3 0 0
  AQUAVANE 50-130/A 2 0 0
  AQUAVANE 50-200/B 4 0 0
  AQUAVANE 50-260/B 2 0 0
  AQUAVANE 80-160/A 1 0 0
  AQUAVANE 80-200/B 3 0 0
  AQUAVANE 80-260/A 3 0 0
  AQUAVANE 80-400/B 1 0 0
  IMPELLER FOR AQUAVANE 40-160/B 1 0 0
  IMPELLER FOR AQUAVANE 50-260/B 1 0 0
  IMPELLER FOR AQUAVANE 65-200/B 1 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 25 EagleBurgmann 23 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 45 EagleBurgmann 1 0 0
  AQUAVANE 32-260/B 5 0 0
  AQUAVANE 65-320/ B 2 0 0
  AQUAVANE 65-260/B 2 0 0
  AQUAVANE 32-200/A, Trimmed 2 0 0
  ELITE E100-40, (A20C) 1 0 0
  AQUAVANE 65-160/A 2 0 0
  AQUAVANE 32-200/B 3 0 0
  AQUAVANE 65-320/A 2 0 0
  IMPELLER FOR AQUAVANE 50-160/A 4 0 0
  IMPELLER FOR AQUAVANE 65-200/A 2 0 0
  AQUAVANE 40-200/A 5 0 0
  AQUAVANE 32-200/A 6 0 0
  Part Kit; Rathi Coupling SW276 2 0 0
  Aquavane 50-320/A+SS420+MS 1 0 0
  AQUAVANE 50-260/A 2 0 0
  IMPELLER FOR AQUAVANE 32-200/A 3 0 0
  AQUAVANE 150-320/A 1 0 0
  AQUAVANE 250-320/A 3 0 0
  AQUAVANE 32-160/A 9 0 0
  AQUAVANE 100-400/B 2 0 0
  AQUAVANE 100-200/A 2 0 0
  AQUAVANE 65-200/B 3 0 0
  AQUAVANE 65-260/A 4 0 0
  AQUAVANE 80-160/B 4 0 0
  AQUAVANE 150-260/A 1 0 0
  AQUAVANE 40-130/A 8 0 0
Aquavane Total   198 0 0
BOA-H BOA-H Cast Iron JL 1040 DN 150mm 13 0 0
  BOA-H Cast Iron JL 1040 DN 200mm 25 0 0
  BOA-H Cast Iron JL 1040 DN 20mm 6 0 0
  BOA-H Cast Iron JL 1040 DN 250mm 12 0 0
  BOA-H Cast Iron JL 1040 DN 32mm 18 0 0
  BOA-H Cast Iron JL 1040 DN 40mm 3 0 0
  BOA-H Cast Iron JL 1040 DN80mm 20 0 0
  BOA-H Nodular Cast Iron JS 1025; PN16; DN80 mm 16 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN100mm 8 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN25mm 5 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN40mm 21 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN50mm 41 0 0
  BOA-H Cast Iron JL 1040 DN 300mm 1 0 0
  Check Valve BOA-RVK; PN 16; DN 32; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 6 0 0
  Check Valve BOA-RVK; PN 16; DN 50; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 12 0 0
  Check Valve BOA-RVK; PN 16; DN 25; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 14 0 0
  Check Valve BOA-RVK; PN 16; DN 40; Body CuZn39Pb3; Seat Metal to Metal; Conn All Connection 19 0 0
  BOA-H Nodular Cast Iron JS 1025; PN16; DN300mm 1 0 0
BOA-H Total   241 0 0
CK-Pump Spare Parts Mechanical Seal SZH/ 1 7/8 Carbide 5 0 0
  Mechanical Seal SZH/1 5/8 Carbide 5 0 0
  Mechanical Seal SZH/1375/Rb-Rb VSIC 5 0 0
CK-Pump Spare Parts Total   15 0 0
CK-Pumps Aquaflow 100x75-300 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 3 0 0
  Aquaflow 100x75-420 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 3 0 0
  Aquaflow 150x100-300 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 2 0 0
  Aquaflow 80x50-280 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 18 0 0
CK-Pumps Total   26 0 0
Consumable Items Flanges DN 65 PN 16, DIN Type 4 0 0
  V-Belt SPA-2360 37 0 0
  V-Belt SPB 1900 3 0 0
  Flange DN 50 PN 16 DIN standard 30 0 0
  V-Belt SPB 2120 3 0 0
  Rubber Spider, Sapre part Flexible coupling for RDL 600-710 A 19 0 0
  Flanges 3" ANSI B73.15 Class 300#RF 26 0 0
  Blind Flange DN 65 PN 16, DIN 2 0 0
  Cable Gland M25x1.5 2 0 0
  Level Sensor Liquiphant FTL20-302D 14 0 0
Consumable Items Total   140 0 0
Coupling Coupling - Flender H - 140 / 140 29 0 0
  Magnetic Clutch Borelli 24 VDC dia.pulley 12" 18 0 0
  COUPLING - Flender - B58 25 0 0
  Rubber - Martin - F180F 5 0 0
Coupling Total   77 0 0
DIAPHRAGM VALVES Sisto RSK-S PN.16 DN.100 NRH/NRH, IIR disc; JIS 10K Flange 2 0 0
  Sisto RSK-S PN.16 DN.200 NRH/NRH, IIR disc; JIS 10K Flange 1 0 0
  SISTO 16 DN200 Body Cast iron with NR-H lining; Diaphragm EPDM 1 0 0
  SISTO 16 DN125 Body Cast iron with NR-H lining; Diaphragm EPDM 2 0 0
DIAPHRAGM VALVES Total   6 0 0
Diesel Engines V-Belt SPA 1500 8 0 0
Diesel Engines Total   8 0 0
DIN BAL&CONTR VALVES Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 250; Conn All Connection; c/w MR25 Gearbox 26 0 0
DIN BAL&CONTR VALVES Total   26 0 0
DIN GLOBE VALVES ECOLINE SC 150 ND 150 mm; RF; Body : A216 WCB; Trim 8 (13%Cr/stellite) 7 0 0
  NORI 160 RXS DN50mm 16Mo3 body material 5 0 0
  NORI 320 ZXSV DN40 mm SW 10 CrMo 9-10 body. 3 0 0
  NORI 160 ZXS ND 15mm, Butt weld end conn., Body Mat'l 16Mo3 6 0 0
  NORI 160 ZXS DN25 mm; SW; Body : 13 CrMo 4-5 DN25mm 1 0 0
  Eco-BLT 150 ND25 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 22 0 0
  NORI 320 ZXSV DN20 mm; SW; Body : 10 CrMo 9-10 (1.7380) 5 0 0
  NORI 160 ZXS DN32mm; Body 13 CrMo 4-5 (1.7335) 8 0 0
  NORI 160 ZXS DN15 mm; BW; Body : 13 CrMo 4-5 10 0 0
  NORI 500 ZXSV DN65 mm 4 0 0
  NORI 500 ZXSV DN50 mm 6 0 0
  NORI 320 ZXSV DN25 mm; SW; Body : 10 CrMo 9-10 (1.7380) 1 0 0
  NORI 160 ZXS DN25 mm; BW; Body : 13 CrMo 4-5 DN25mm 6 0 0
DIN GLOBE VALVES Total   84 0 0
Ecoline Eco-BLT 150 ND15 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 56 0 0
  Eco-BLT 150 ND25 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 70 0 0
  Eco-BLT 150 ND25 mm; RF; Body : A216 WCB; trim 304 10 0 0
  Eco-BLT 150 ND32 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 25 0 0
  Eco-BLT 150 ND40 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 83 0 0
  Eco-BLT 150 ND40 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 22 0 0
  Eco-BLT 150 ND50 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 18 0 0
  Eco-BLT 150 ND80 mm; DIN PN16 RF; Body : ASTM A351 CF8M; 316 Ball; RTFE seat 32 0 0
  ECOLINE FY 150 ND 150 mm; RF; Body : ASTM A216 WCB; with SS304 screen 1 0 0
  ECOLINE FY 150 ND 250 mm; RF; Body : ASTM A216 WCB; with SS304 screen 2 0 0
  ECOLINE FY 150 ND 300 mm; RF; Body : ASTM A216 WCB; with SS304 screen 2 0 0
  ECOLINE GL 150 ND 200 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 150 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 5 0 0
  ECOLINE GL 150 ND250 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GL 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 30 0 0
  ECOLINE GL 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GL 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE GT 150 ND 100 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite); Size : ND100 mm 32 0 0
  ECOLINE GT 150 ND 65 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 9 0 0
  ECOLINE GT 150 ND 80 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 4 0 0
  ECOLINE GT 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 27 0 0
  ECOLINE GT 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 29 0 0
  ECOLINE GT 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 20 0 0
  ECOLINE GT 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 45 0 0
  ECOLINE GT 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 22 0 0
  ECOLINE GT 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 66 0 0
  ECOLINE PC 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 12 0 0
  ECOLINE PC 800 ND20 mm; SW Trim 8 (13%Cr/stellite): A105 23 0 0
  ECOLINE PC 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 15 0 0
  ECOLINE PC 800 ND32 mm; SW Trim 8 (13%Cr/stellite): A105 25 0 0
  ECOLINE PC 800 ND40 mm; SW Trim 8 (13%Cr/stellite): A105 35 0 0
  ECOLINE PC 800 ND50 mm; SW Trim 8 (13%Cr/stellite): A105 20 0 0
  ECOLINE SC 150 ND 100 mm; RF; Body : A216 WCB; Trim 8 (13%Cr/stellite) 9 0 0
  ECOLINE SC 150 ND 200 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 4 0 0
  ECOLINE SC 150 ND 350 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 4 0 0
  ECOLINE SC 150 ND 50 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 7 0 0
  ECOLINE SC 150 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 6 0 0
  ECOLINE SC 150 ND100 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 1 0 0
  ECOLINE SC 150 ND200 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 5 0 0
  ECOLINE SC 150 ND150 mm; RF; Body : A351 CF8 (304); trim 2 (304/304) 6 0 0
  ECOLINE GL 150 ND 100 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 9 0 0
  ECOLINE GL 800 ND15 mm; SW Trim 8 (13%Cr/stellite): A105 37 0 0
  ECOLINE GL 800 ND25 mm; SW Trim 8 (13%Cr/stellite): A105 30 0 0
  ECOLINE GT 150 ND 250 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  Eco-BLT 150 ND50 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 33 0 0
  Eco-BLT 150 ND80 mm; RF; Body : ASTM A351 CF8M; PTFE seat 10 0 0
  ECOLINE SC 300 ND 80 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GT 150 ND 50 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GL 150 ND 50 mm; RF; Body : ASTM A216 WCB; Trim 8 (13%/stellite) 5 0 0
  ECOLINE GT 150 ND 500 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  ECOLINE GT 150 ND 150 mm; RF; Body : ASTM A216 WCB; trim 8 (13%Cr/stellite); Size : ND150 mm 9 0 0
Ecoline Total   996 0 0
Etanorm Casing Wear Ring, P/N.502.1 10 0 0
  Casing Wear Ring, P/N.502.2 14 0 0
  Coupling - Martin - F100F 1 0 0
  Deep Grooved Ball Bearing, P/N.321 9 0 0
  Grooved Ball Bearing, P/N.321 8 0 0
  Joint Ring, P/N.411.4 8 0 0
  Joint Ring, P/N.411.5 15 0 0
  O-Ring, P/N.412.1 11 0 0
  O-Ring, P/N.412.2 2 0 0
  Plain Bearing, P/N.310 11 0 0
  Seal Ring, P/N.411.1 37 0 0
  Seal Ring, P/N.411.5 2 0 0
  Seat Ring Holder, P/N.476 39 0 0
  Shaft, P/N.210 2 0 0
  Circlip, P/N.932.1 2 0 0
  Mechanical Seal, P/N.433 21 0 0
  ETANORM G1 80-160 1 0 0
  Bearing 6305-2RS1/C3 20 0 0
  Mechanical Seal P/N.433 19 0 0
Etanorm Total   232 0 0
Etanorm SYA/SYN Bearing Bracket Complete, P/N.330 4 0 0
  Circlip, P/N.932 21 0 0
  Circlip, P/N.932.2 44 0 0
  ETANORM SYA 100-160 2 0 0
  ETANORM SYA 50-160 2 0 0
  ETANORM SYA 65-160 4 0 0
  ETANORM SYA 65-250 4 0 0
  ETANORM SYA 80-160 9 0 0
  ETANORM SYA 80-200 1 0 0
  ETANORM SYA 80-250 8 0 0
  Etanorm SYT 100-200 7 0 0
  Etanorm SYT 100-250 3 0 0
  Etanorm SYT 125-250 2 0 0
  Etanorm SYT 40-200 6 0 0
  Etanorm SYT 50-200 5 0 0
  Etanorm SYT 65-160 6 0 0
  Etanorm SYT 65-200 5 0 0
  Etanorm SYT 65-250 4 0 0
  Etanorm SYT 80-200 10 0 0
  Joint Ring, P/N.411.3 50 0 0
  Joint Ring, P/N.411.4 21 0 0
  O-Ring, P/N.412.2 19 0 0
  Ring, P/N.500 5 0 0
  Seat Ring Holder, P/N.476 15 0 0
  Support Disc, P/N.550.2 8 0 0
  Etanorm SYT 100-160 4 0 0
  Circlip, P/N.932.3 6 0 0
  ETANORM SYA 100-250 3 0 0
  Etanorm SYT 80-250 6 0 0
  Etanorm SYT 50-160 3 0 0
  Etanorm SYT 125-400 SYT8 1 0 0
  Shim Ring, P/N.550.4 3 0 0
  Etanorm SYT 40-250 3 0 0
  Etanorm SYT 32-160 3 0 0
Etanorm SYA/SYN Total   297 0 0
FORGED CHECK SICCA 800 PCF ND15mm SW trim 8 (13%Cr/stellite); A105 6 0 0
FORGED CHECK Total   6 0 0
FORGED GATE SICCA 1500 GTF ND15mm SW trim 8 (13%Cr/stellite); A105 59 0 0
  SICCA 1500 GTF ND20mm SW trim 8 (13%Cr/stellite); A105 51 0 0
  SICCA 1500 GTF ND25mm SW trim 8 (13%Cr/stellite); A105 19 0 0
  SICCA 1500 GTF ND40mm SW trim 8 (13%Cr/stellite); A105 60 0 0
  SICCA 1500 GTF ND50mm SW trim 8 (13%Cr/stellite); A105 47 0 0
  SICCA 800 GTF ND20mm SW trim 8 (13%Cr/stellite); A105 21 0 0
  SICCA 800 GTF ND40mm SW trim 8 (13%Cr/stellite); A105 39 0 0
  SICCA 800 GTF ND50mm SW trim 8 (13%Cr/stellite); A105 40 0 0
  SICCA 1500 GTF ND40mm; SW; Body : A182 F22; trim 5 (double stellite) 8 0 0
  SICCA 1500 GTF ND50mm; SW; Body : A182 F22; trim 5 (double stellite) 8 0 0
  SICCA 1500 GTF ND25mm; SW; Body : A182 F22; trim 5 (double stellite) 6 0 0
  SICCA 1500 GTF ND40 mm; SW; Body : ASTM A182 F22; trim 8 (13%Cr/stellite) 1 0 0
FORGED GATE Total   359 0 0
FORGED GLOBE SICCA 1500 GLF ND 20mm; SW; Body : A182 F22; trim 5 (double stellite) 24 0 0
  SICCA 1500 GLF ND15 mm; SW; Cody : A182 F22 trim 8 (13%Cr/stellite). 20 0 0
  SICCA 1500 GLF ND15mm; SW; Body : A182 F22; Trim 5 (double stellite) 37 0 0
  SICCA 1500 GLF ND25 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 32 0 0
  SICCA 1500 GLF ND25mm; SW; Body : A182 F22; trim 5 (double stellite) 24 0 0
  SICCA 1500 GLF ND40 mm; SW; Body : A182 F22; trim 5 (double stellite) 50 0 0
  SICCA 1500 GLF ND40 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 40 0 0
  SICCA 1500 GLF ND50 mm; SW; Body : A182 F22; trim 5 (double stellite) 66 0 0
  SICCA 1500 GLF ND50 mm; SW; Body : A182 F22; trim 8 (13%Cr/stellite) 43 0 0
  SICCA 1500 GLF ND50 mm; SW; trim 8 (13%Cr/stellite); A105 34 0 0
  SICCA 2500 GLF ND15 mm SW trim 5 (Double stellite); A182 F22 10 0 0
  SICCA 2500 GLF ND20 mm SW A182 F22 trim 5 (double stellite) 91 0 0
  SICCA 2500 GLF ND25 mm SW A182 F22 Trim 5 (Double stellite) 51 0 0
  SICCA 2500 GLF ND25mm SW trim 8 (13%Cr/stellite); A105 12 0 0
  SICCA 2500 GLF ND40 mm SW A182 F22 Trim 5 (double stellite) 23 0 0
  SICCA 800 GLF ND50mm SW trim 8 (13%Cr/stellite); A105 49 0 0
  SICCA 800 PCF ND20mm SW trim 8 (13%Cr/stellite); A105 5 0 0
  SICCA 800 PCF ND40mm SW trim 8 (13%Cr/stellite); A105 2 0 0
  SICCA 800 GLF ND40mm SW trim 8 (13%Cr/stellite); A105 17 0 0
  SICCA 800 GLF ND15mm SW trim 8 (13%Cr/stellite); A105 74 0 0
  SICCA 800 GLF ND20mm SW trim 8 (13%Cr/stellite); A105 33 0 0
  SICCA 1500 GLF ND20 mm; SW; trim 8 (13%Cr/stellite); A105 77 0 0
  SICCA 1500 GLF ND25 mm; SW; trim 8 (13%Cr/stellite); A105 23 0 0
  SICCA 1500 GLF ND40 mm; SW; trim 8 (13%Cr/stellite); A105 43 0 0
  SICCA 1500 GLF ND 15 mm; SW trim 8 (13%Cr/stellite); A105 15 0 0
  SICCA 2500 GLF ND50 mm SW A182 F22 Trim 5 (double stellite) 49 0 0
  SICCA 2500 GLF ND15mm SW trim 8 (13%Cr/stellite); A105 13 0 0
FORGED GLOBE Total   957 0 0
ISORIA 10-16 Spare liner K Nitrile DN 450 mm for ISORIA 10 15 0 0
  XV EPDM Liner (new generation) ND700 mm for ISORIA 10 4 0 0
ISORIA 10-16 Total   19 0 0
ISORIA 20-25 Spare liner XA EPDM for ISORIA 20 ND150 mm 12 0 0
ISORIA 20-25 Total   12 0 0
LCC Adapter Plate, LCC16, P/N. 145.10 2 0 0
  Adapter, Stuffing Box, 70mm, LCC1; P/N. 450 5 0 0
  Adjusting Nut, OCTAGON, LCC; P/N. 924 2 0 0
  ADJUSTING NUT, OCTAGON, LCC; P/N.924 8 0 0
  ADJUSTING NUT, OCTAGON, P/N.924 2 0 0
  ADJUSTING SCREW, 670MM PEDESTAL, P/N.909 2 0 0
  Adjusting Screw, 670MM PEDESTAL,LCC; P/N. 909 2 0 0
  ADJUSTING SCREW, 670MM PEDESTAL,LCC; P/N.909 8 0 0
  BEARING LOCK NUT, 125MM, SKF AN-2, P/N.923 12 0 0
  Bearing Lock Nut, 70MM, TAN-15; P/N. 923 16 0 0
  BEARING LOCK WASHER, 125MM, TW128, P/N.380 12 0 0
  Bearing Lock Washer, 70MM, TW115; P/N. 380 14 0 0
  CARTRIDGE BEARING HOUSING, 125MM, P/N.350 6 0 0
  FASTENER KIT, CBA, 125MM, OIL FIL, P/N.99-4 5 0 0
  FASTENER KIT, CBA, 3 100MM OIL FI; P/N.99-4 3 0 0
  Fastener Kit, CBA, 70MM; P/N. 99-4 5 0 0
  FASTENER KIT, PEDESTAL, 70MM & 10, P/N.99-4 4 0 0
  Fastener Kit, Pedestal, 70MM & 10; P/N. 99-4 5 0 0
  FASTENER KIT, PEDESTAL, 70MM & 10; P/N.99-4 5 0 0
  FASTENER KIT, SBA, 125MM SHAFT, P/N.99-4 5 0 0
  Fastener Kit, SBA, For 70MM Shaft; P/N. 99-4 11 0 0
  FASTENER KIT, WET END, LCC16 (METAL); P/N. 99-4 13 0 0
  FASTENER KIT, WET END, LCC24/26-XH, P/N.99-4 2 0 0
  Gasket Kit, CBA, 100MM, P/N.99-9 25 0 0
  GASKET KIT, CBA, 125MM, P/N.99-9 26 0 0
  Gasket Kit, CBA, 70MM, P/N.99-9 20 0 0
  Gasket Kit, Shaft Sleeve, 125MM, P/N.99-9 10 0 0
  Gasket Kit, Shaft Sleeve,70 MM, P/N.412.30&400.10 (KIT) 15 0 0
  Gasket Kit, Wet End, LCC16 (METAL), P/N.99-9 20 0 0
  Gasket Kit, Wet End, LCC20 (METAL), P/N.99-9 104 0 0
  GASKET KIT, WET END, LCC24 (METAL)  P/N. 99-9 14 0 0
  GASKET, (IMP./SHAFT SLEEVE); P/N. 400.10 2 0 0
  gasket; P/N. 400.50 1 0 0
  Gland,70MM, P/N.452 17 0 0
  GREASE RETAINER RING, THRUST END  P/N. 63-7 27 0 0
  Impeller, 19-11/16" RH,CS3.5R, 8X20-3ME5-7/16, P/N.230 7 0 0
  IMPELLER, 24", RH, 4.5SR, 10X24,Gasite 29G,  P/N.230 10 0 0
  Inpro Seal, 70MM CBA, P/N.420.50 30 0 0
  Inpro Seal, 70MM CBA, P/N.420.70 16 0 0
  Lantern Ring, 100MM, P/N.458 17 0 0
  Lantern Ring, 125MM , P/N.458 6 0 0
  Lantern Ring, 70MM, P/N.458 17 0 0
  LCC H150-500.4K AB M1 13 0 0
  LCC H200-610.5K AB M1 6 0 0
  LCC M100-400.3K GB M1 8 0 0
  LSA 8x10, Assembly: 9594D-00 1 0 0
  O RING, .275" X 51-15/16"; P/N. 412.01 2 0 0
  O RING, ARP-568-232, .139" X 9"; P/N. 412.30 1 0 0
  OIL SIGHT GAUGE, 1"NPT, LSP151-06; P/N.642 43 0 0
  Pipe Plug, hex socket; P/N.903.71 14 0 0
  Pipe Plug, P/N.903.71 3 0 0
  Pipe Plug; P/N.903.50 & 903.70 18 0 0
  Power Supply Converter 12 VDC to 24 VDC 2 0 0
  Radial Bearing, (100MM),  P/N.322 3 0 0
  RADIAL BEARING, (125MM) 22230ES T, P/N.322 26 0 0
  Radial Bearing, (70MM), P/N.322 21 0 0
  Radial End Cover, 100 MM, P/N.361.50 14 0 0
  Radial End Cover, 125 MM, P/N.361.50 10 0 0
  Radial End Cover, 70 MM, P/N.361.50 8 0 0
  Shaft Key (METRIC) 20 X 12 X 135; P/N. 940 4 0 0
  SHAFT KEY (METRIC) 32 X 18 X 210, P/N.940 5 0 0
  Shaft Sleeve LCC 150-4 SS304 21 0 0
  Shaft Sleeve, 70MM, P/N.524 18 0 0
  Shaft Sleeve, LCC-H 200-610.5K, material SS304 15 0 0
  Shaft Sleeve, P/N.524 ; material SS304 26 0 0
  Shaft, P/N.210 3 0 0
  Shell, 4LCC16 CH3-35 1 0 0
  SHELL, 6LCC20 CH5-3/4 (XH); P/N.101 1 0 0
  SHELL, 8LCC24 CH7 (XH), P/N.101 2 0 0
  Stud, all thread ; P/N. 902.32 6 0 0
  Stud, all Thread; P/N.902.32 3 0 0
  STUD: DOUBLE END, M12X30; P/N. 902.10 36 0 0
  Stuffing Box LCC 150-4 SS304 16 0 0
  Stuffing Box LCC-H 200-610.5K, material : CD4MCu 2 0 0
  Stuffing Box LCC-M 100-400.3K, material : CD4MCu 2 0 0
  SUCTION LINER, 10LCC24 (XH), P/N.13-19 5 0 0
  Suction Liner, 8LCC20 (XH), P/N.13-19 7 0 0
  SUCTION PLATE, 10LCC24 (XH), P/N.16-1 2 0 0
  Suction Plate/Liner, 6LCC16, P/N.16.3 6 0 0
  SWIVEL HOIST RING, M10 X 1.50 X 16.7, P/N.59-47 2 0 0
  SWIVEL HOIST RING, M10 X 1.50 X 16.7; P/N.59-47 2 0 0
  Temperature Gage, P/N.692 10 0 0
  THRUST BEARING SPACER, 100MM; P/N.45-4 5 0 0
  THRUST BEARING SPACER, 125MM, P/N.45-4 11 0 0
  THRUST BEARING, (125MM) 90024, P/N.324 32 0 0
  Thrust Bearing, (70MM), P/N.324 19 0 0
  Thrust End Cover, 100 MM, P/N.361.70 13 0 0
  Thrust End Cover, 125 MM, P/N.361.70 9 0 0
  Thrust End Cover, 70MM, P/N.361.70 8 0 0
  Tuf Pack#100 (3 Rings/Set) 20MM, P/N.461 39 0 0
  Tuf Pack#100(4 Rings/Set) 20 MM, P/N.461 39 0 0
  Vacuum Tank LCC 100 7 0 0
  Shaft Sleeve LCC-H 150-500.4K, material : CD4MCu 13 0 0
  Stuffing Box Housing, 125 mm, P/N.451 6 0 0
  STUD: DOUBLE END, M16DX45L; P/N. 902.01 22 0 0
  STUD: DOUBLE END, M20X55, P/N.902.02 5 0 0
  STUD: DOUBLE END, M20X55; P/N.902.02 22 0 0
  Clamping Plate, P/N.732 55 0 0
  Pipe Plug ; P/N. 903.60 22 0 0
  Inpro Seal, 100MM CBA, P/N.420.50 23 0 0
  Gasket Kit,Shaft Sleeve, 100MM, P/N.99-9 67 0 0
  FASTENER KIT, SBA, 100MM, DRY DES; P/N.99-4 1 0 0
  STUD: DOUBLE END, M20X55; P/N.902.01 44 0 0
  STUD: DOUBLE END, M20X75; P/N.902.10 44 0 0
  Shaft Sleeve LCC-M 100-400.3K, material : CD4MCu 6 0 0
  STUD: DOUBLE END, M24X55, P/N.902.01 24 0 0
  Shaft Sleeve, 125MM, P/N.524 20 0 0
  Shaft Sleeve, 100MM, P/N.524 22 0 0
  Bearing Lock Washer, 100MM, P/N.380 1 0 0
  SHAFT, 125MM X 1280MM, PLUG 4.5SR, P/N.210 3 0 0
  CARTRIDGE BEARING HOUSING, 100MM; P/N.350 12 0 0
  Cartridge Bearing Housing, 70MM L; P/N. 350 7 0 0
  Gland Packing SLADE 3300G, size 19.05 x 19.05 mm ( 3/4 inch) 9 0 0
  Inpro Seal, 100MM, P/N.420.70 26 0 0
  Impeller, 19-11/16"RH,S9194R, 8X20-, P/N.230 2 0 0
  Stuffing Box, 70mm; P/N. 451 7 0 0
  Stuffing Box, 100MM, P/N.451 8 0 0
  Shell, 3LCC12 CH2-3 1 0 0
  Wear Plate, Wet End Conversion(PLUG 225), P/N.135 1 0 0
  Stuffing Box, 70mm, LCC16, W/INTE; P/N. 451 7 0 0
  M20 FLAT WASHER, P/N.550.10 28 0 0
  STUD: DOUBLE END, M20X75, P/N.902.10 12 0 0
  GASKET, P/N.400.50 2 0 0
  O RING, .275" X 38, P/N.412.70 2 0 0
  Suction Plate/liner,  P/N. 16-3 1 0 0
  Shell,  P/N. 101 1 0 0
  Gland, 100MM, P/N.452 21 0 0
  M20 NUT, P/N.920.10 20 0 0
  GREASE RETAINER RING, THRUST END, 100MM, P/N. 41-1 4 0 0
  GREASE RETAINER RING 1 0 0
  LCC-H150-500.4E ABM1 2 0 0
LCC Total   1677 0 0
MDX IMPELLER 67.00, 70.00, 225MM LSA 24X, P/N.480-6866C-04-0028G 1 0 0
  SNAP RING GASKET, LSA-64 HD, SECT “A”, P/N.600-8247P-00-01RUT 2 0 0
  SHAFT SLEEVE SPACER, 225MM PLUG, P/N.654-5958C-00-0FABS 2 0 0
  SPACER/SHAFT SLEEVE GASKET, P/N.621-0482P-10-03MIP 1 0 0
  O” RING, ½” X 75-3/8”, P/N.624-7719P-32-04RUP 2 0 0
  GASKET IMPELLER, P/N.621-0480P-96-03MIP 1 0 0
  SNAP RING GASKET: TBC 64/LSA 64, P/N.600-8240P-00-01RUP 2 0 0
  ADJ. LINER KIT, MDX 600, P/N.674-1950B-15-0001K 2 0 0
MDX Total   13 0 0
Megachem MEGACHEM Cm 80-200 5 0 0
  MEGACHEM Cm 25-150 1 0 0
  Megachem Cm 32 - 250 2 0 0
  Impeller, P/N.230 for Megachem 65-160 1 0 0
Megachem Total   9 0 0
Megaflow Megaflow K 50-200(00) 4 0 0
Megaflow Total   4 0 0
MISCELLANEOUS Coupling - Flender H - 110 / 100 27 0 0
  Coupling - Flender H - 125 / 100 25 0 0
  Coupling - Flender H - 125 / 140 15 0 0
  Coupling - Flender H - 160 / 140 30 0 0
  Coupling - Flender H - 180 / 180 24 0 0
  Coupling - Flender H - 180 / 200 26 0 0
  Coupling - Flender H - 200 / 180 27 0 0
  Coupling - Flender H - 200 / 200 25 0 0
  Coupling - Flender H - 80 / 100 24 0 0
  Coupling - Flender H - 95 / 100 23 0 0
  Martin Pulley SPZ90-3 grooves+SPZ118-3grooves (Complete) 2 0 0
  Taper Bushing No. 3525 MARTIN COUPLING bore diameter 80 mm 3 0 0
MISCELLANEOUS Total   251 0 0
MOTORS SIEMENS MOTOR 37 kW/2955 Rpm/380 V/3 ph/50 Hz/IMB 3/Class F/IP55/TEFC 2 0 0
  TECO Motor 1.1 kW 2P, B3, 50Hz, 380 V 2 0 0
  TECO WESTINGHOUSE 7.5kW/4Pl/50Hz/B3/380V Frame size : 132 M 2 0 0
  TECO WESTINGHOUSE 2.2kW/2Pl/50Hz/B3/380V Frame size : 90 L 3 0 0
MOTORS Total   9 0 0
Movichrom Movitec VCF2-13 ; Motor 1.5 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  Movitec VCF2-16 ; Motor 2.2 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  Movitec VCF2-20 ; Motor 2.2 kW, 2P, IP55 230/400V, 50 Hz 4 0 0
  Movitec VCF2-25 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 5 0 0
  Movitec VCF4-20 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 4 0 0
  Movitec VF45-5-1 ; Motor 15 kW, 2P, IP55 400/692V, 50 Hz 3 0 0
  Movitec VCF 2/24 B 2.2 kW standard 230-400V/2pl/50Hz  EFF1/IE2 2 0 0
  Movitec VF65-4 2 0 0
  Movitec VF18-3 ; Motor 3 kW, 2P, 3 phase, IP55 400/692V, 50 Hz 3 0 0
  Movitec VF 2-9 B ; Motor 1.1 kW, 2P, IP55 1x230V, 50Hz 1 0 0
  SEALKIT FOR VCF 10, P/N.433 14 0 0
Movichrom Total   42 0 0
Movitec Movitec V 10-10  Motor :  5.5 kW/2890 rpm/50Hz/ 230-400V/IP55 2 0 0
  Movitec VCF10-18 ; Motor 7.5 kW, 2P, IP55 400/692V, 50 Hz 4 0 0
  Movitec VCF4-18 ; Motor 3 kW, 2P, IP55 400/692V, 50 Hz 8 0 0
  Movitec VCF4-23 ; Motor 4 kW, 2P, IP55 400/692V, 50 Hz 6 0 0
  Movitec VCF4-25 ; Motor 4 kW, 2P, IP55 400/692V, 50 Hz 6 0 0
  Movitec VF10-2 ; Motor 0.75 kW, 2P, IP55 1*230V, 50 Hz 1 0 0
  Movitec VCF18-12 ; Motor 11 kW, 2P, IP55 400/692V, 50 Hz 2 0 0
  Movitec VCF 32 -12 ; Bare pump only 1 0 0
  Mechanical Seal Cartridge Kit VF24/32/45/65, P/N.433 1 0 0
  Bearing Motor 4Kw for Movitec 4-25 6306-2Z/C3 1 0 0
  SEALKIT FOR VCF 4, P/N.433 6 0 0
  SEALKIT FOR VCF 2, P/N.433 14 0 0
  Impeller, P/N.230.02 3 0 0
  Spacer Sleeve, P/N : 525.04 3 0 0
  Spacer Sleeve De-Staging, P/N : 525.08 16 0 0
  Spacer Casing Upper, P/N : 108.06 3 0 0
  Stage Casing Upper, P/N.108.06 16 0 0
  RMG12/12-G606 (U3BEGG) 6 0 0
  RMG12/16-G606 (Q1BEGG) 8 0 0
  RMG12/12-G606 (Q1BEGG) 15 0 0
  RMG12/16-G606 (U3BEGG) 4 0 0
  RMG12/25-G606 (U3BEGG) 8 0 0
Movitec Total   134 0 0
Multitec Gland Packing, P/N.461 8 0 0
  MTC C 50/10-04.1 10.66 1 0 0
  Sleeve, P/N.520.1 & 520.2 8 0 0
  Spacer Sleeve, P/N.525.1 & 525.2 8 0 0
  MTC C 50/08-04.1 10.66 3 0 0
  MTC C 50/08-03.1 10.66 3 0 0
  Mechanical Seal, P/N.433.1 1 0 0
  Bearing 6309ZZC3 brand SKF 4 0 0
  Shaft Protecting Sleeve, P/N.524 2 0 0
Multitec Total   38 0 0
Omega Omega 100-250 A (GB) 1 0 0
  Omega 150-460 A (GB) 2 0 0
  Omega 200-520 A (GB) 1 0 0
  Omega 80-270 A (GB) 2 0 0
Omega Total   6 0 0
OTH.BUTTERFLY VALVES KE T1 : 3I.6kF.FS ND125 mm c/w SR330 Lever 10 0 0
  KE T1 : 3I.6kF.FS ND150 mm c/w SR330 Lever 17 0 0
  KE T1 : 3I.6kF.FS ND200 mm c/w MR25 Gearbox 32 0 0
  KE T1 : 3I.6kF.FS ND250 mm c/w MR50 Gearbox 4 0 0
  KE T1 : 3I.6kF.FS ND300 mm c/w MR50 Gearbox 7 0 0
  KE T1 : 3I.6kF.FS ND50 mm c/w SR260 Lever 18 0 0
  KE T1 : 3I.6kF.FS ND80 mm c/w SR260 Lever 22 0 0
OTH.BUTTERFLY VALVES Total   110 0 0
RDL / RDLO Key, P/N.940.2 9 0 0
  Parallel Key, P/N.940.2 9 0 0
  Shaft Nut, P/N.921.2 4 0 0
  V-Ring, P/N.411.2 8 0 0
  Spacer Ring, P/N.504 1 0 0
  Spacer Sleeve, P/N.525 4 0 0
  Packing Assembly, P/N : 461 1 0 0
  Set of Gland Packing, P/N.461 2 0 0
RDL / RDLO Total   38 0 0
RPH / RPHB RPH S5 150-360 1 0 0
  RPH S5 40-361 2 0 0
  RPH S5 80-360 1 0 0
  RPH S6 80-450 3 0 0
RPH / RPHB Total   7 0 0
SINGLE ACTING HYDR Rotex Actuator Double Acting Pneumatic Model : ECF 175 5 0 0
  Rotex Actuator Double Acting Pneumatic Model : ECF 90 (pressure : 4 Bar) 4 0 0
  Rotex Actuator Double Acting Pneumatic Model : ECF 110 4 0 0
  Rotex Actuator Double Acting Pneumatic Control  Model : ECF 125 1 0 0
  Rotex Actuator Double Acting Pneumatic Model : ECF 80 1 0 0
  Rotex Actuator Double Acting Pneumatic Control  Model : ECF 63 6 0 0
SINGLE ACTING HYDR Total   21 0 0
STRAINERS BOA-S  Cast Iron JL 1040 DN15mm 15 0 0
  BOA-S Cast iron JL 1040 DN100mm 7 0 0
  BOA-S cast iron JL 1040 DN125mm 10 0 0
  BOA-S Cast Iron JL 1040 DN150mm 9 0 0
  BOA-S Cast Iron JL 1040 DN200mm 15 0 0
  BOA-S Cast iron JL 1040 DN250mm 5 0 0
  BOA-S cast iron JL 1040 DN25mm 24 0 0
  BOA-S Cast Iron JL 1040 DN32mm 10 0 0
  BOA-S cast iron JL 1040 DN65 mm 16 0 0
  BOA-S cast iron JL 1040 DN80mm 10 0 0
  BOA-S Cast iron JL 1040 DN50 mm 25 0 0
  BOA-S cast iron JL 1040 DN40mm 11 0 0
  BOA-S  Cast Iron JL 1040 DN20mm 10 0 0
STRAINERS Total   167 0 0
Vacuum Pump Bushing, Crank-Pin, P/N.30210199 1 0 0
  GASKET-FRAME END COV, P/N.30439319 5 0 0
  KIT-SHAFT SEAL-2475- (Key Woddruff), P/N.95433173 16 0 0
  KIT-SHAFT SEAL-2475-, P/N.32204539 superceded by P/N.32499949 7 0 0
  Ring Set, P/N.32194151 11 0 0
  ROD CONECTING, P/N.32004152 4 0 0
  Vacuum Pump - Ingersollrand - V244 12 0 0
  Valve Finger, P/N.30221170 30 0 0
  GASKET-FLANGE, P/N.30289870 superceded by P/N.30259870 15 0 0
  GASKET-4"AIR HEAD P/N.30279038 superceded by P/N.32267551 6 0 0
  GASKET-4"AIR HEAD SP, P/N.30280515 superceded by P/N.32267544 6 0 0
  GASKET-SHAFT END COV, P/N.30294995 9 0 0
  Piston, Air-Complete, P/N.30215263 4 0 0
  Cylinder, P/N. 37128535 2 0 0
Vacuum Pump Total   128 0 0
VALVES SPARES Spare liner XA EPDM for ISORIA 20 ND100 mm 9 0 0
  Spare liner XV EPDM for DN 350 mm for ISORIA 10 2 0 0
  XV EPDM liner for ISORIA 10 ND100mm 3 0 0
  ISORIA NG ND150 XV Liner 1 0 0
  Spare liner XV EPDM ND600 mm for ISORIA 10 1 0 0
VALVES SPARES Total   16 0 0
WK / WL Balance Disc WLN 250, P/N.601 3 0 0
  Key First Stage, P/N.940.3 5 0 0
  O-Ring, P/N.412.1 3 0 0
  Packing Ring, P/N.461 17 0 0
  Seal Ring, P/N.411.1 3 0 0
  Shaft Protecting Sleeve, P/N.524.1 1 0 0
  Balance Disc Seat WLN 250, P/N.602 1 0 0
  WK 50/6 1 0 0
  Seal Ring, P/N.411.4 5 0 0
  Impeller, P/N.230 4 0 0
  Key Coupling, P/N.940.1 2 0 0
  Key Balance Disc, P/N.940.4 2 0 0
  Bearing Clamp, P/N.571 1 0 0
  Gasket, P/N.400.3 3 0 0
  Split Bearing, P/N.370 2 0 0
  Stage Bush, P/N.541 8 0 0
  Gasket, P/N.400.2 7 0 0
  O-Ring, P/N.412.3 3 0 0
WK / WL Total   71 0 0
WKL O-Ring, P/N.412.2 4 0 0
  Plug, P/N.903.2 10 0 0
  Seal Ring, P/N.411.5 2 0 0
  Mechanical Seal, P/N.433 1 0 0
  Seal Ring, P/N.411.3 7 0 0
  Locating Pin, P/N.562 6 0 0
  Plug, P/N.903.1 5 0 0
  Seal Ring, P/N.411.2 2 0 0
  Neck Bush, P/N.542 3 0 0
WKL Total   40 0 0
(blank) Air Release and Vacuum Break Valves; 080RGX1641 – 80mm Ventomat Series ‘RGX’ 5 0 0
  Angular Contact Ball Bearing, P/N.320 4 0 0
  Aquaflow 100x75-420 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 6 0 0
  Aquaflow 40x32-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  Aquaflow 50x32-250 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 5 0 0
  Aquaflow 50x40-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 20 0 0
  Aquaflow 80x50-330 (Bare Shaft Pump) Semi Open Impeller (SS304/SS304/SS304/ Mech. Seal SiC vs SiC) 2 0 0
  Aquaflow 80x50-330 (Bare Shaft Pump) Semi Open Impeller (SSCMA/SSCMA/SS304/ Mech. Seal SiC vs SiC) 4 0 0
  AQUAVANE 100-320/B 13 0 0
  AQUAVANE 100-320/D 1 0 0
  AQUAVANE 125-320/B 2 0 0
  AQUAVANE 125-400/B 1 0 0
  AQUAVANE 250-400/B 2 0 0
  AQUAVANE 40-320/A 3 0 0
  AQUAVANE 50-320/D 4 0 0
  AQUAVANE 65-130/B 2 0 0
  AQUAVANE 65-320/D 2 0 0
  Bearing Bracket Complete, P/N.330 7 0 0
  Bearing Bracket, P/N : 330 4 0 0
  Bearing Cover, P/N : 360 5 0 0
  Bearing Cover, P/N : 360, 5 0 0
  BOA-H cast iron JL 1040 DN200mm 9 0 0
  BOA-H Nodular cast iron JS 1025; PN25; DN150mm 5 0 0
  BOA-H Nodular Cast Iron JS 1025; PN25; DN65mm 2 0 0
  BOA-R Cast Iron JL 1040 DN100mm 20 0 0
  BOA-R cast iron JL 1040 DN125mm 12 0 0
  BOA-R Cast Iron JL 1040 DN150mm 15 0 0
  BOA-R Cast Iron JL 1040 DN200mm 10 0 0
  BOA-R Cast iron JL 1040 DN25mm 3 0 0
  BOA-R Cast iron JL 1040 DN40mm 6 0 0
  BOA-R Cast iron JL 1040 DN80mm 17 0 0
  Bush, P/N.602 6 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 400;Conn B16.5 cl 150 c/w MR 100 Gearbox 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 450;Conn B16.5 cl 150 c/w MR 100 Gearbox 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 300;Conn B16.5 cl 150 c/w CR 510 Lever Handle 15 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 400;Conn B16.5 cl 150 c/w MR 100 Gearbox 2 0 0
  Casing Wear Ring, P/N : 502.1 27 0 0
  Casing Wear Ring, P/N : 502.2 16 0 0
  Casing Wear Ring, P/N.502.1 39 0 0
  Casing Wear Ring, P/N.502.2 22 0 0
  Circlip, P/N. 932.3 31 0 0
  COUPLING - Flender - B110 (complete) 35 0 0
  COUPLING - Flender - B125 (complete) 9 0 0
  COUPLING - Flender - B140 (complete) 34 0 0
  COUPLING - Flender - B160 (complete) 38 0 0
  COUPLING - Flender - B180 (complete) 34 0 0
  COUPLING - Flender - B200 (complete) 65 0 0
  COUPLING - Flender - B225 (complete) 47 0 0
  COUPLING - Flender - B68 4 0 0
  COUPLING - Flender - B80 (complete) 61 0 0
  Coupling - Flender H - 95 / 140 (complete) 2 0 0
  Coupling - Martin - F120F 4 0 0
  Coupling - Martin - F140F 7 0 0
  Coupling - Master - F180F 1 0 0
  CPK U 65-250 1 0 0
  Diesel Engine VOLVO type: TAD1643VE, Power 565 kW @ 1800 rpm, Standard Industrial 2 0 0
  Eco-BLC 1000 WOG ND10mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 60 0 0
  Eco-BLC 1000 WOG ND20 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 59 0 0
  Eco-BLC 1000 WOG ND20mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 75 0 0
  Eco-BLC 1000 WOG ND25 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 68 0 0
  Eco-BLC 1000 WOG ND25mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 22 0 0
  Eco-BLC 1000 WOG ND32mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 40 0 0
  Eco-BLC 1000 WOG ND40 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 45 0 0
  Eco-BLC 1000 WOG ND40mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 25 0 0
  Eco-BLC 1000 WOG ND50 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 54 0 0
  Eco-BLC 1000 WOG ND8mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE Seat 7 0 0
  Eco-BLT 150 ND100 mm; RF; Body : ASTM A351 CF8M; PTFE seat 10 0 0
  Eco-BLT 150 ND15 mm; RF; Body : ASTM A351 CF8M; PTFE seat 25 0 0
  Eco-BLT 150 ND20 mm; RF; Body : ASTM A216 WCB; SS316 Ball; PTFE seat 36 0 0
  Eco-BLT 150 ND20 mm; RF; Body : ASTM A351 CF8M; PTFE seat 25 0 0
  Eco-BLT 150 ND25 mm; RF; Body : ASTM A351 CF8M; PTFE Seat 27 0 0
  Eco-BLT 150 ND32 mm; RF; Body : ASTM A351 CF8M; PTFE seat 25 0 0
  ECOLINE GT 600# ND 200mm, RF, Body A216WCB, Trim :1(13%Cr-13%Cr), C/W gear operated 2 0 0
  ECOLINE SC 150 ND 50 mm; RF; Body : A351 CF8; trim 2 (304/304) 5 0 0
  ECOLINE SC 150 ND 80 mm; RF; Body : A351 CF8; trim 2 (304/304) 5 0 0
  Fastener Kit, Wet End, P/N.99-4 3 0 0
  Gasket Kit, SBA, LLC16 on 70 MM, P/N.99-9 35 0 0
  Grooved Ball Bearing ,P/N : 321 20 0 0
  Grooved Ball Bearing, P/N : 321 21 0 0
  Impeller, 15.55",RH, S9194R, 6X16-3ME-11/32, P/N.230 5 0 0
  Impeller, P/N : 230 29 0 0
  Impeller, P/N 411.1 2 0 0
  Inpro Seal, 125MM CBA, P/N.420.50 31 0 0
  Inpro Seal, 125MM CBA, P/N.420.70 40 0 0
  Joint Ring, P/N : 411.3 55 0 0
  Joint Ring, P/N : 411.4 63 0 0
  Joint Ring, P/N.411.3 47 0 0
  Joint Ring, P/N.411.4 5 0 0
  Joint Ring, P/N.411.5 15 0 0
  Martin parts - F100F Taper Bush 2 0 0
  Martin Parts - F120F Rubber 4 0 0
  Martin Parts - F140F  Rubber 2 0 0
  Martin Parts - F140F Taper Bush 5 0 0
  Martin Parts  F180F - Rubber 5 0 0
  Martin Parts  F180F - taper Bush 4 0 0
  Mechanical seal 4 0 0
  Mechanical Seal - Conversion Kits for Shaft Module 35 EagleBurgmann 11 0 0
  Mechanical Seal, P/N : 433 33 0 0
  MEGACHEM C 40-160 1 0 0
  MEGACHEM Cm 50-250 2 0 0
  MOVIBOOST VP 2/1003 1 0 0
  Movitec VCF10-20 ; Motor 7.5 kW, 2P, IP55 400/692V, 50 Hz 3 0 0
  O-ring ID:151.764 x 5.33; Material : NBR 24 0 0
  O-ring ID:81.915 x 5.33; Material : NBR 7 0 0
  O-Ring, P/N : 411.1 5 0 0
  O-Ring, P/N : 412 5 0 0
  O-Ring, P/N : 412.1 33 0 0
  O-Ring, P/N : 412.2 5 0 0
  O-Ring, P/N.412.1 43 0 0
  Plain Bearing, P/N : 310 22 0 0
  PLC control Omron 6 0 0
  Pressure Gauge Diaphragm model BDT18/A, c/w Flush Ring, Brand Badotherm 1 0 0
  Ring, P/N. 500 13 0 0
  Ring, P/N.500 20 0 0
  Seat Ring Holder, P/N : 476 25 0 0
  Set of Gasket and O-Ring for MTC 50, P/N.411 & 412 10 0 0
  Shaft Key, P/N.940 8 0 0
  Shaft, 100MM X 46-21/32", PLUG CS3.5R, P/N.210 6 0 0
  Shaft, P/N : 210 23 0 0
  Shaft, P/N.210 37 0 0
  Shaft, P/N.210 for MTC 50/10 4 0 0
  Shaft, P/N.210 for MTC 50/8 2 0 0
  SICCA 2500 GLF ND20mm SW trim 8 (13%Cr/stellite); A105 23 0 0
  SICCA 2500 GLF ND40mm SW trim 8 (13%Cr/stellite); A105 17 0 0
  SICCA 2500 GLF ND50mm SW trim 8 (13%Cr/stellite); A105 24 0 0
  SIEMENS MOTOR 10 kW/2pole/B3/50Hz/ IP55, EEx e II Increase safety 1 0 0
  Siemens Motor 18.5 kW 2P, B3 1 0 0
  Sleeve, P/N : 520 8 0 0
  Spacer Sleeve, P/N : 525 12 0 0
  Spare Parts Kit, P/N : 99-28.2 52 0 0
  STUD, ALL THREAD, M20X145, 300 SERIES SS , P/N. 902.32 6 0 0
  Suction hose 8" with flange ANSI 150, 6 mtr 2 0 0
  Suction Plate, 8LCC20 (XH), P/N.16-1 4 0 0
  Support Disc, P/N.550.1 13 0 0
  Support Disc, P/N.550.2 28 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 24 mm w/ bolt 7 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 36.5 mm w/ bolt 7 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 55 mm w/ bolt 7 0 0
  V-Belt SPA 1800 4 0 0
  V-belt SPA 1900 6 0 0
  V-belt SPA 2000 8 0 0
  V-RING FOR MTC 65 (P/N. 411) 4 0 0
  V-Rings, P/N. 411 11 0 0
  WESTIN Motor 75 kW 2P, B3 2 0 0
  XV EPDM liner ND500 mm for ISORIA 10 6 0 0
  Y-type stariner ND 25 mm NPT Brass body; SS304 strainer insert 1 0 0
  Circlip, P/N.932.1 10 0 0
  Circlip, P/N : 932.2 20 0 0
  MEZ Motor 4 kW 2P, B3 1 0 0
  Shim Ring, P/N.550.4 10 0 0
  ISORIA 10 T1 3t6k6XV ND 50mm C/w Actair 3 1 0 0
  Eco-BLC 1000 WOG ND15 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 17 0 0
  Siemens motor 1.5kW/4pl/3ph/400V/50Hz EExde IIC T4, Explosion proof type 2 0 0
  Mechanical Fuel Gauge, Moeller, 11-3/4" depth 8 0 0
  AQUAVANE 50-130/D 1 0 0
  Mechanical Seal, P/N.433 4 0 0
  Mechanical Fuel Gauge, Moeller, 17-3/4" depth 32 0 0
  Eco-BLC 1000 WOG ND32 mm; NPT; Body : A351 CF8M; 316SS ball; PTFE seat 25 0 0
  Angular Contact Ball Bearing, P/N : 321.1 1 0 0
  SICCA 1500 GLF ND20 mm; SW; Body : A182 F22 trim 8 (13%Cr/stellite). 28 0 0
  Elektrim Motor 7.5 kW 2P, B3 2 0 0
  CMG Motor Exd 5.5kW/2PL/3PH/50Hz Class I, Zone I, Group IIA & IIB, T4 (PPD Series) 1 0 0
  Support Disc, P/N : 550.1/2 14 0 0
  Amarex KRT E65-210/022 UG-125 1 0 0
  Washer, P/N : 550.3 7 0 0
  Stud, P/N : 902.1 20 0 0
  Circlip, P/N : 932.1 20 0 0
  ECOLINE FY 150 ND 100 mm; RF; Body : ASTM A216 WCB; SS304 Screen 5 0 0
  ISORIA 10 T1 : 3T.6K.2.VC ND80mm c/w SR180 lever 8 0 0
  Eco-BLT 150 ND40 mm; RF; Body : ASTM A351 CF8M; PTFE Seat 24 0 0
  CPK GC 65-315 2 0 0
  Double Nipple 1/2 inch,  Sch.40, Material SS316L 18 0 0
  Stud, P/N : 902.2 20 0 0
  Eco-BLT 150 ND50 mm; RF; Body : ASTM A351 CF8M; PTFE seat 24 0 0
  Movitec VCF18-10 ; Motor 11 kW, 2P, IP55 230/400V, 50 Hz 2 0 0
  SISTO 10 PN 10 DN 50mm Body JL1040 1 0 0
  MEGA GCm 80-250 1 0 0
  Eco-BLC 1000 WOG ND15mm; NPT; Body : ASTM A216 WCB; 316 Ball; PTFE seat 11 0 0
  Pedestal, 670MM, LCC DRY DESIGN, 70MM, P/N.18-2 4 0 0
  SICCA GLF 2500;DN 15 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 29 0 0
  SICCA GLF 2500;DN 50 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 2 0 0
  VEM Motor 90kW/2P/3ph/400V/50Hz/IMV1/F/IP55/Frame:280M 2 0 0
  General Brand Pressure Gauge dual reading0-25 bars/0-350 lb/in2 dia.4".Conn.NPT1/2";glycerin display 1 0 0
  Siemens Motor 1LG4-317-2AB60-Z 200 kW/2P/B3/400V/50Hz/F/IP55/Frame: 315L 3 0 0
  Pressure Gauge Diaphragm model LFBSPG-V-CSU, Flushed type Diaphragm 72 0 0
  General Brand Pressure Gauge dual reading0-40 bars/0-600 lb/in2 dia.4".Conn.NPT1/2";glycerin display 20 0 0
  Coupling - Flender H - 160 / 100 (complete) 8 0 0
  General Brand  Pressure Gauge reading -760mmHgto15 bars diameter 4".Conn. NPT1/2";glycerin display 15 0 0
  General Brand Pressure Gauge dual reading0-60bars/0-850 lb/in2 dia.4".Conn.NPT1/2";glycerin display 5 0 0
  COUPLING - Flender - B250 (complete) 1 0 0
  AQUAVANE 125-400/D 1 0 0
  Butterfly valve BOAX-B T2.3G.6K.6g.XC;DN 250;Conn All Connection c/w MR 25 Gearbox 34 0 0
  Taper Bushing No. 2517 MARTIN COUPLING bore diameter 42 mm w/ bolt 2 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 100; All Connection; c/w CR 230 Lever Handle 50 0 0
  SICCA GLF 2500;DN 40 mm; Body A105; Trim 5 ; Conn SW; Handwheel Actuator 18 0 0
  Wika Pressure Gauge dual reading 0-25 bars and 0-350 lb/in2 dia. 4".Conn.NPT1/2"; display oil filled 3 0 0
  FASTENER KIT WET END, P/N : 638-K0000-05-0001K 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 200; All Connection; c/w CR510 Lever Handle 3 0 0
  ECOLINE GT 150 ND 600 mm; RF; Body : A216 WCB; trim 8 (13%Cr/stellite) 1 0 0
  Gasket 3/4" 150# x 3mmT (27mmID x 57mmOD x 3mmT) graphite / asbestos free 1 0 0
  V-Ring, P/N.411.2 1 0 0
  Booster Control Advanced Pp 3 12 0 0
  Booster control advanced 6 Pp 5 0 0
  Vent Plug, P/N.672 5 0 0
  Butterfly Valve BOAX B T2.3G.6K.6.XC; DN 150; Conn All Connection; c/w CR300 Lever Handle 14 0 0
  Clamp Slang 1/4" (SS) 18 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 200; All Connection; c/w MR25 Gearbox 61 0 0
  Accu 12V / 200AH 1 0 0
  Union Ellbow SS316 : 12 LU/MM for tubing OD. 1/2" 1 0 0
  Mechanical Fuel Gauge, Moeller, 8" depth 11 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 300;Conn B16.5 cl 150 c/w CR 510 Lever Handle 1 0 0
  Bearing SKF NU 410 C3 5 0 0
  Bearing  SKF 7311 BEP 341 E 4 0 0
  Butterfly Valve BOAX-B T2.3g.6k.6g.XC; DN 250; Conn All Connection c/w CR510 Handle 13 0 0
  Flanges 6" DIN 2501-PN 25, SS304L 2 0 0
  pressure gauge NPT 1/4" 1 0 0
  RING:LANTERN 225MM PLUG; U FRAME FOR GIW PUMP MDX600 SUIT CYCLONE, P/N : 618-0946A -00-0148B 2 0 0
  Coupling - Flender H - 180 / 140 (complete) 4 0 0
  Butterfly Valve BOAX B T2.3G.6K.6.XC; DN 65; Conn All Connection; c/w CR165 Lever Handle 9 0 0
  Clarke's engine instrument panel Assm, 24V ETR 1 0 0
  Elektrim Motor 37 kW 2P, B3 3 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 350;Conn EN1092 PN 10 c/w MR 50 Gearbox 3 0 0
  Pressure gauge with glyserin "FTB" 0-25 Bar DN. 1/2" NPT 1 0 0
  O-Ring, P/N.412 2 0 0
  Bearing SKF NU 2209 EC 2 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6g.XC;DN 350;Conn EN1092 PN 16 c/w MR 50 Gearbox 12 0 0
  Spacer Sleeve, P/N.525.2 4 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 350;Conn B16.5 cl 150 c/w MR 50 Gearbox 6 0 0
  Bearing FAG 6311 C3 2 0 0
  Bearing SKF 63152Z 4 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6G.XC;DN 40; All Connection; c/w CR165 Lever Handle 11 0 0
  Male Connector 1/2"-1/2" 21 0 0
  Mechanical Seal, P/N. 433.02 1 0 0
  SKF Bearing 32234 2 0 0
  Controller for Booster Pump VF18-3 type BCA3E 1 0 0
  Bearing H 210 4 0 0
  Sight Glass 1/2" 1 0 0
  Set of Gasket MTC 100, P/N. 99-9.1 2 0 0
  Val-matic Swing-Flex Check Valve Dia. 4 inches #504A.3 8 0 0
  Gasket Set, P/N.400403SET 2 0 0
  Set of anti friction MTC 100, P/N. 99-20.4 1 0 0
  Val-matic Swing-Flex Check Valve Dia. 8 inches #508A.3 ( see remarks for MOC) 19 0 0
  Bearing 6309 ZZ/C3 4 0 0
  Sealant loctite 574 4 0 0
  Bearing NU 210 EK SKF 13 0 0
  Accu 12V/120A 2 0 0
  Set of Gasket RO, P/N. 99-9.3 2 0 0
  Diesel Engine VOLVO type: TAD1343VE, Power 332 kW @ 2100 rpm, Standard Industrial 5 0 0
  M20 NUT, SS (304 CR 18-8) , P/N. 920.32 5 0 0
  Set of Piston MTC 100 RO, P/N. 99-20.2 1 0 0
  M20 FLAT WASHER, 300 SERIES SS , P/N. 550.32 5 0 0
  Rotex Limit Switch Type :  DXLW1A2 + M1 bracket with HONEY WELL switches 12 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC;DN 450;Conn EN1092 PN 10 c/w MR 100 Gearbox 1 0 0
  O-Ring, P/N. 412.1 1 0 0
  Relay Omron 5 0 0
  BEARING 6208 /C3 8 0 0
  Casing Wear Ring, P/N. 502.1 1 0 0
  Val-matic Swing-Flex Check Valve Dia. 6 inches #506A.3 16 0 0
  BOA-RVK DN40mm 2 0 0
  Repair Set RO MTC 100/125, P/N. 99-20.1 1 0 0
  Coupling - Flender H - 110 / 140 (complete) 17 0 0
  Butterfly Valve BOAX-B T2.3G.6K.6.XC; DN 50; All Connection; c/w CR165 Lever Handle 99 0 0
  Weld Neck Flange DN 32 (1/14") 150 RFSch 40 1 0 0
  Radial Ball Bearing 6305 - C3 2 0 0
  PACKING:PREFOR MED 0.750IN; 11.000; 5EA/SET P/N : 461 1 0 0
  ABB Motor 22 kW type1HX + 200 MLB 2, 400V/2940 rpm/3ph/50Hz/F/IP55/Frame :200ML 1 0 0
  Lampu Sorot 400 Watt 2 0 0
  ABB Motor 30 kW type1HX + 200 MLC 2, 400V/2935 rpm/3ph/50Hz/F/IP55/Frame :200ML 2 0 0
  ABB Motor 2.2 kW type 1HX + 100LB 2, 400V/2830 rpm/3ph/50Hz/F/IP55/Frame :100LB 2 0 0
  Mechanical Seal, P/N : 433.02 8 0 0
  ***BEARING 6213 ZZ/C3 2 0 0
  Mechanical Seal M7N4 / Q1Q1VGG for Omega 250-600A 1 0 0
  Elbow 5", 45 deg, Sch. 40 2 0 0
  ABB Motor 30 kW type 1HX + 225 SMB 4, 400V/1470 rpm/3ph/50Hz/F/IP55/Frame :225SM 1 0 0
  Male connector 1/2" NPT x 1/4 " OD tubing (SS316) 14 0 0
  Coupling - Flender H - 140 / 250 (Complete) 24 0 0
  Flange 1.5" ANSI Class 150, Steel 2 0 0
  Impeller, P/N.230 for MTC 50/X 4.1 1 0 0
  ABB Motor 4 kW type 1HX + 132 SMB 2,400V/2870 rpm/3ph/50Hz/F/IP55/Frame :132SM 1 0 0
  ABB Motor 18.5 kW type 1HX + 180 MLC 4, 400V/1460 rpm/3ph/50Hz/F/IP55/Frame :180ML 1 0 0
  XV EPDM Liner ND100mm 2 0 0
  XV EPDM Liner ND150mm 2 0 0
  Val-matic Swing-Flex Check Valve Dia. 12 inches #512A.3 2 0 0
  ABB Motor 22 kW type 1HX + 200 MLB 2, 400V/2940 rpm/3ph/50Hz/F/IP55/Frame :200ML 1 0 0
  XV EPDM Liner ND200mm 3 0 0
  Gland Packing Set for LCC, Size 3/4", Material: PTFE 150 0 0
  Coupling - Flender H - 200 / 140 (complete) 25 0 0
  Cable Accu Dia. 70 mm 12V/ maks 200 A, black colour 5 0 0
  Leval Indicator, P/N.638 4 0 0
  ECF110 FOR DN150 10 0 0
  ABB Motor 5.5 kW type 1HX + 132 SMC 2,400V/2865 rpm/3ph/50Hz/F/IP55/Frame :132SM 1 0 0
  De-Staging Kit V(C/S) B 10, P/N : 525.08 6 0 0
  De-Staging Kit V(S)F 24/32/45/65, P/N : 525.08 6 0 0
  De-Staging Kit V(C/S) B 15, P/N : 525.08 4 0 0
  De-Staging Kit VCF B 2/4/6, P/N : 525.08 10 0 0
  Automatic Grease Dispenser, 25GFP 5 0 0
  Shaft Sleeve SCCAP, 125 MM, P/N.524 3 0 0
  Shaft Sleeve SCCAP, 100 MM, P/N.524 9 0 0
  Pressure Transducer SEN-3251 C535, range - (minus) 1 ~ 5 bar 4 0 0
  Pressure Transducer  PAS-G EE 4 S 4 N S 0 0 4 0 0
  V-Ring, P/N : 411, ID : 90 mm, Material : NBR 2 0 0
  V-Ring V-28A (P/N: 411), size : V-28A, Material : NB60 for MTC 50 2 0 0
  Packing support for shaft, material : wodden 6 0 0
  Mechanical Seal, P/N.433.01 5 0 0
  O-Ring, P/N : 412, Size : 72 x 4 mm, Material :  NBR 2 0 0
  Mechanical Seal, P/N.433.2 3 0 0
  V-Ring V-32A (P/N: 411), size : V-32A, Material : NB60, for MTC 65 4 0 0
  Joint Ring, P/N : 411.4, Size : AT 177/186.5 X1 Material: Graphite 4 0 0
  Mechanical Seal, P/N.433.4 3 0 0
  Grease Fitting, Type 205200 14 0 0
  Pulley SPA 6",2 grovees, steady, bore 100 mm 2 0 0
  ECOLINE GT 150 ND 300 mm; RF; Body ; ASTM A216 WCB; trim 8 (13%Cr/stellite) 5 0 0
(blank) Total   3806 0 0
DIN CHECK VALVES BOA-RVK DN25mm 2 0 0
DIN CHECK VALVES Total   2 0 0
DIN GATE VALVES Flange DN 200 PN 25 2 0 0
DIN GATE VALVES Total   2 0 0
SNW Impeller nut, P/N : 922 1 0 0
SNW Total   1 0 0
ACTUATOR SPARES Rotex Solenoid  Valve Type :  VAD213NC 2 0 0
  Rotex Manual Override Type : 450 10 0 0
  Rotex Electropneumatic Positioner Type : RTX 1000 1 0 0
ACTUATOR SPARES Total   13 0 0
WKT Constant Level Oiler, P/N.638 1 0 0
WKT Total   1 0 0
Mega Flat Gasket, P/N.400.3 2 0 0
Mega Total   2 0 0
Etaline Impeller, P/N : 230 2 0 0
  Mechanical Seal, P/N : 433 6 0 0
  Mechanical Seal, P/N.433 4 0 0
Etaline Total   12 0 0
Control Valves MIL Control Valve NPS.1", Class 600, Flange, Accessories:AS/SVP 1 0 0
Control Valves Total   1 0 0
RDLO Parallel Key, P/N.940.1 4 0 0
  Lock Washer, P/N.931 4 0 0
RDLO Total   8 0 0
RPK Angular Contact Ball Bearing, P/N.320.02, SKF 7309 BECBM 1 0 0
  Constant level Oiler, P/N : 638 13 0 0
RPK Total   14 0 0
Grand Total   10393 0 0